Jamo A102HCS5 Manual

The Jamo A102HCS5 is a compact home theater speaker system featuring 5 satellite speakers and a powered subwoofer. This 5.1 channel system delivers high-quality audio with 75W RMS power per satellite and 150W RMS for the subwoofer. The system includes magnetic shielding, wall-mount capabilities, and is designed for easy integration with home theater receivers. Below are key sections for setup, specifications, placement, operation, and troubleshooting.

System Overview

Key components: 5 satellite speakers, 1 powered subwoofer, speaker wire, wall-mount brackets, user manual.

Component	Description
Satellite Speakers	4 x front/rear channels, 1 x center channel
Powered Subwoofer	150W RMS, down-firing design
Speaker Terminals	Spring-loaded connectors
Wall-mount Brackets	Included for flexible placement
Magnetic Shielding	Prevents interference with TV displays
Frequency Response	Satellites: 150Hz-20kHz, Subwoofer: 38Hz-150Hz
Impedance	8 ohms
Sensitivity	86 dB

Package Contents

Unpack and verify all components are present.

1. 5 x Satellite speakers (A102)
2. 1 x Powered subwoofer (SUB 250)
3. 1 x Speaker wire roll (50 feet)
4. 5 x Wall-mount brackets
5. 1 x User manual
6. 1 x Warranty card

IMPORTANT! Inspect all components for damage before installation. Contact retailer if any items are missing or damaged.

Speaker Placement

Optimal placement for best surround sound experience.

1. Front Left/Right: Place at ear level, angled toward listening position
2. Center Channel: Position above or below TV screen
3. Rear Left/Right: Place behind listening position
4. Subwoofer: Corner placement for enhanced bass response
5. Distance: Maintain equal distance from listening position

NOTE: Use wall-mount brackets for secure installation. Ensure speakers are firmly mounted.

Technical Specifications

• System Type: 5.1 Home Theater Speaker System
• Satellite Power: 75W RMS each
• Subwoofer Power: 150W RMS
• Frequency Response: 38Hz - 20kHz
• Impedance: 8 ohms
• Sensitivity: 86 dB (2.83V/1m)
• Driver Size: Satellites: 4" woofer, 1" tweeter
• Subwoofer: 8" down-firing driver
• Dimensions: Satellites: 6.3" x 4.7" x 5.9"
• Finish: Black ash vinyl

Wiring Connections

Proper wiring ensures optimal performance and safety.

1. Strip wire ends: Remove 1/2 inch of insulation
2. Connect to speakers: Press spring-loaded terminals
3. Connect to receiver: Match polarity (+ to +, - to -)
4. Subwoofer connection: Use RCA cable to receiver sub-out
5. Power connection: Plug subwoofer into AC outlet

CAUTION! Ensure receiver is powered off during connections. Maintain proper polarity.

Receiver Setup

Configure your AV receiver for optimal performance.

1. Set speaker size: All speakers to "Small"
2. Crossover frequency: Set to 80Hz
3. Subwoofer mode: LFE or LFE+Main
4. Channel levels: Run auto-calibration or manual setup
5. Distance settings: Input speaker distances from listening position

TIP: Use receiver's auto-calibration feature for initial setup, then fine-tune manually.

Calibration Guide

Fine-tune your system for the best audio experience.

1. Use SPL meter: Set all channels to 75dB reference level
2. Subwoofer level: Match main speakers' volume
3. Crossover adjustment: 80Hz recommended for satellites
4. Phase control: Adjust subwoofer phase for seamless integration
5. Room correction: Use receiver's room EQ if available

NOTE: Room acoustics affect sound quality. Experiment with placement and settings.

Maintenance & Care

Proper maintenance ensures long-term performance.

• Cleaning: Use dry, soft cloth only
• Ventilation: Keep subwoofer vents clear
• Moisture: Avoid exposure to liquids and high humidity
• Temperature: Operate in normal room conditions
• Inspection: Periodically check wire connections

WARNING! Do not use chemicals or abrasive cleaners. Unplug before cleaning.

Warranty Information

Jamo provides limited warranty coverage.

• Warranty Period: 5 years for speakers, 2 years for electronics
• Coverage: Manufacturing defects in materials and workmanship
• Exclusions: Damage from misuse, accidents, or unauthorized modifications
• Registration: Complete and return warranty card
• Service: Contact authorized Jamo service center

For warranty claims: Contact customer service with proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Loose connections	Check all wire connections; ensure receiver is on proper input
Distorted sound	Overdriven amplifier	Reduce volume level; check receiver settings
No bass from subwoofer	Power or connection issue	Ensure subwoofer is powered on; check RCA cable connection
Hum or buzz	Ground loop	Use ground loop isolator; check cable routing
One speaker not working	Wire or receiver issue	Swap speaker wires to test; check receiver channel assignment

Technical Support: Contact Jamo customer service for assistance.

Service Centers: Visit www.jamo.com for authorized service locations