Jamo S606 Manual

The Jamo S606 is a high-performance home theater speaker system featuring floor-standing front speakers, center channel, and surround speakers. This 5.0 channel system delivers exceptional audio quality with precise sound reproduction, optimized for home theater and music listening. Below are key sections for setup, specifications, placement guidelines, connection instructions, and maintenance.

System Overview

The Jamo S606 package includes: S 606 floor-standing speakers (pair), S 60 CEN center channel speaker, S 60 SUR surround speakers (pair), speaker grilles, and user manual.

Component	Description
S 606 Floor-standing	Main front left/right speakers with dual woofers and tweeter
S 60 CEN Center	Horizontal center channel for dialogue clarity
S 60 SUR Surround	Bipolar surround speakers for immersive sound field
Speaker Grilles	Magnetic attachment for protection and aesthetics
Binding Posts	High-quality gold-plated connectors
Spike Feet	Adjustable spikes for floor coupling and stability

Unpacking and Inspection

Carefully unpack all components and verify contents against packing list.

1. Remove protective packaging from all speakers
2. Inspect for shipping damage - check cabinets and drivers
3. Attach spike feet to floor-standing speakers if desired
4. Remove magnetic grilles to inspect drivers
5. Keep original packaging for future transport or service

WARNING! Handle speakers with care to avoid damage to drivers and cabinets. Use two people for floor-standing models.

Speaker Placement

Optimal placement ensures best sound performance.

1. Front speakers: Place S 606 speakers 6-10 feet apart, angled toward listening position
2. Center channel: Position S 60 CEN above or below TV screen, centered with front speakers
3. Surround speakers: Mount S 60 SUR on side or rear walls, 2-3 feet above ear level
4. Clearance: Allow 1-2 feet clearance from walls for proper bass response
5. Toe-in: Angle front speakers 15-30 degrees toward main listening area

CAUTION! Ensure stable placement to prevent tipping. Use included spikes on carpeted surfaces.

Technical Specifications

• System Type: 5.0 channel home theater speaker system
• Frequency Response: 45Hz - 20kHz (±3dB)
• Sensitivity: 89dB (2.83V/1m)
• Nominal Impedance: 6 ohms
• Power Handling: 120 watts RMS, 160 watts peak
• Tweeter: 1" soft dome with waveguide
• Woofer: 5.25" polyfiber cones (S606: dual woofers)
• Crossover Frequency: 2.2kHz
• Finish: Black ash vinyl or dark apple veneer
• Dimensions: S606 - 38.2" H x 7.5" W x 11.8" D

Connection Guide

Proper connection ensures optimal performance and safety.

1. Turn off amplifier/receiver before making connections
2. Strip speaker wire 1/2 inch to expose fresh copper
3. Connect to binding posts: red to positive (+), black to negative (-)
4. Ensure secure connections without stray wire strands
5. Route cables safely to avoid tripping hazards
6. Connect front L/R to amplifier front outputs
7. Connect center to amplifier center output
8. Connect surrounds to amplifier surround outputs

Tip: Use quality speaker wire (16-gauge minimum) for best performance.

Amplifier Matching

Compatible with most home theater receivers and amplifiers.

Amplifier Power	Recommended Use
50-80 watts/channel	Ideal for medium-sized rooms
80-120 watts/channel	Optimal for larger rooms
120+ watts/channel	For high-volume listening

WARNING! Do not exceed recommended power ratings. Distorted signals can damage speakers.

Calibration and Setup

Proper calibration ensures balanced sound across all channels.

1. Run amplifier's auto-setup/calibration system if available
2. Set all speakers to "small" in receiver settings for best results
3. Adjust crossover to 80Hz for seamless integration with subwoofer
4. Manually set speaker distances from listening position
5. Balance channel levels using test tones
6. Fine-tune center channel level for clear dialogue

CAUTION! Avoid extreme volume levels during initial setup and break-in period.

Care and Maintenance

Regular maintenance preserves appearance and performance.

• Dust cabinets with soft, dry cloth only
• Clean grilles with soft brush attachment on vacuum
• Avoid liquid cleaners or chemical solutions
• Keep away from direct sunlight and heat sources
• Check connections periodically for corrosion
• Inspect drivers for damage during cleaning

WARNING! Never touch driver cones - they are delicate and easily damaged.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speaker	Loose connections, wrong input	Check wire connections, verify amplifier settings
Distorted sound	Overdriven amplifier, damaged driver	Reduce volume, inspect driver for damage
Intermittent sound	Loose wires, faulty connections	Secure all connections, check wire integrity
Weak bass response	Poor placement, phase issues	Reposition speakers, check polarity
Buzzing/rattling	Loose components, port noise	Tighten all fasteners, check for objects in ports

Warranty Information

Jamo S606 speakers are covered by a 5-year limited warranty against manufacturing defects. Warranty covers parts and labor for factory defects. Does not cover damage from misuse, accidents, or unauthorized modifications. Keep original receipt for warranty claims.

Service Contact: For warranty service or technical support, contact authorized Jamo dealer or visit www.jamo.com