Jands Event 416 Manual

The Jands Event 416 is a professional lighting console designed for stage and event lighting control. It features 416 channels, 48 programmable memories, 24 submasters, chase sequences, MIDI compatibility, DMX512 output, and intuitive programming interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main control surface, LCD display, DMX output ports, MIDI ports, power input, fader banks, and programming buttons.

Installation

Unpack and inspect contents. Place on stable surface or mounting location.

1. Connect power: Use provided power cable to AC outlet.
2. Connect DMX output: Use XLR cables to connect to lighting fixtures.
3. Connect MIDI devices: Optional connection for external control.
4. Secure mounting: Ensure console is stable and accessible.

WARNING! Ensure proper ventilation; do not block air vents. Use stable power source.

First-Time Setup

Power on console; initialize system settings.

1. Power up: Connect to power and switch on.
2. DMX addressing: Set starting address for fixtures.
3. Channel patching: Assign channels to specific fixtures.
4. Test outputs: Verify all fixtures respond correctly.
5. Save setup: Store initial configuration.

CAUTION! Always power down before connecting/disconnecting DMX cables.

Specifications

• Channels: 416 control channels
• Memories: 48 programmable memories
• Submasters: 24 assignable submasters
• DMX Output: Standard DMX512 protocol
• MIDI: In/Out/Thru ports
• Display: Backlit LCD screen
• Power Requirements: 110-240V AC, 50-60Hz
• Operating Temp: 0°C to 40°C
• Dimensions: Standard console size
• Weight: Approximately 8 kg

Controls and Settings

Access programming via front panel controls and LCD menu system.

Front Panel: Channel faders, submaster faders, programming buttons, LCD display, navigation controls.

Programming: MEMORY buttons for storing scenes, SUBMASTER assignment, CHASE programming, MIDI setup. Settings: DMX configuration, channel patching, display contrast, system preferences.

Connecting Devices

DMX: Standard XLR connectors. MIDI: 5-pin DIN connectors. Power: Standard AC input.

1. Turn off console before making connections.
2. Use proper DMX cables (not microphone cables).
3. Terminate DMX line with 120Ω resistor if needed.
4. Connect MIDI devices for external control.

Tip: Label all cables for easy identification during setup.

Programming Memories

Store and recall lighting scenes and sequences.

1. Select channels: Use channel faders to set levels.
2. Store memory: Press MEMORY button and select memory number.
3. Recall memory: Press corresponding MEMORY button.
4. Program chases: Use CHASE mode to create sequences.
5. Assign submasters: Drag memories to submaster faders.
6. Adjust timing: Set fade times and chase speeds.
7. Save show: Store complete show file.

WARNING! Always save work regularly; console may lose unsaved data if powered down.

Advanced Features

MIDI Control: Sync with external devices. DMX Merging: Combine multiple DMX sources. Macro Programming: Create custom command sequences.

Care & Maintenance

Keep console clean and dust-free. Use compressed air for cleaning. Store in dry environment.

CAUTION! Do not use liquid cleaners; avoid extreme temperatures and humidity.

Regulatory Information

Complies with relevant electrical safety standards. CE marked for European market. FCC Part 15 compliance for electromagnetic emissions. Copyright © Jands. For technical support, contact authorized service centers.

Troubleshooting

Reset: System menu > Factory Reset if available (will erase all data).

Service: Contact authorized Jands service center for repairs.