jands hog 500 manual

The Jands Hog 500 is a professional lighting control console designed for theatrical and live event applications. This digital lighting desk features 60 playback faders, 24 submasters, comprehensive fixture control, built-in effects engine, DMX output, and advanced programming capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main control surface, LCD display screens, playback faders, encoder wheels, DMX outputs, power supply unit.

Feature	Description
Playback faders	60 motorized faders for cue playback
Submasters	24 programmable submasters
LCD displays	Multiple color LCD screens for fixture control
Encoder wheels	12 precision encoders for parameter adjustment
DMX outputs	4 DMX universes output capability
Power supply	Universal AC input 100-240V
Memory	Internal storage for shows and palettes
Effects engine	Built-in effects generator with multiple patterns
Network connectivity	Ethernet port for remote control and backup
Backup battery	Internal battery for memory protection

Installation

Unpack and inspect contents. Place on stable surface or flight case.

1. Connect power: Use supplied power cable to appropriate AC outlet.
2. Connect DMX outputs: Use 5-pin XLR cables to lighting fixtures.
3. Connect network: Use Ethernet cable for remote access and backup.
4. Connect external monitors: Use VGA ports for additional displays.

WARNING! Console is heavy; use proper lifting techniques. Ensure adequate ventilation around unit.

First-Time Setup

Power on console; follow initial setup procedure.

1. Load fixture library: Import or select appropriate fixture profiles.
2. Configure DMX outputs: Set universe addressing and patch fixtures.
3. Set display preferences: Adjust screen brightness and contrast.
4. Create user profiles: Set up user accounts with appropriate access levels.

CAUTION! Ensure stable mounting; secure all cables to prevent tripping hazards.

Specifications

• Control Channels: Up to 4096 DMX channels.
• DMX Outputs: 4 universes via 5-pin XLR.
• Memory: Internal storage for multiple shows.
• Display: Multiple color LCD screens with touch capability.
• Playback: 60 motorized faders, 24 submasters.
• Power Requirements: 100-240V AC, 50-60Hz.
• Dimensions: Standard console size for touring applications.
• Weight: Approximately 35 kg.
• Operating Temp: 0°C to 40°C.

Controls and Settings

Access main menu via MENU button. Front Panel: POWER, ENTER, ESC, numeric keypad, encoder wheels.

Main Controls: POWER, FADERS (1-60), SUBMASTERS (1-24), ENCODER WHEELS, DISPLAY SELECT, EFFECTS, PALETTES.

Programming: Select fixtures, set parameters, record cues. Playback: Use faders and submasters for cue execution. Setup: DMX configuration, fixture patching, user preferences, network settings. Effects: Built-in generator with customizable parameters and timing.

Connecting Devices

DMX: 5-pin XLR outputs. Network: Ethernet for remote control. Monitors: VGA outputs.

1. Turn off console and devices before connecting.
2. Use proper DMX cables with correct termination.
3. Connect network devices for remote operation and backup.
4. Verify all connections before powering on system.

Tip: Always use proper DMX termination at end of line to prevent signal reflection.

Programming and Playback

Supports conventional and intelligent fixtures.

1. Patch fixtures: Load fixture profiles and assign DMX addresses.
2. Program cues: Select fixtures, set parameters, record to faders.
3. Playback: Use faders and submasters for cue execution.
4. Effects: Create and modify built-in effects patterns.
5. Groups: Organize fixtures into groups for easier control.
6. Palettes: Store frequently used positions, colors, and beam parameters.
7. Timing: Set fade times and delay parameters for cues.
8. Backup: Regularly save shows to external media.

WARNING! Always save show file before powering down. Use UPS for critical applications.

Advanced Features

Effects Engine: Multiple built-in effects with customizable parameters. Network Control: Remote operation via HogNet. Cue Lists: Advanced timing and tracking options. Macro Programming: Automate complex sequences.

Care & Cleaning

Unplug before cleaning. Use dry, lint-free cloth for screens; compressed air for faders and buttons.

CAUTION! Do not use liquid cleaners on control surface. Keep away from moisture and extreme temperatures.

Regulatory Information

CE compliant: Meets European safety standards. FCC Part 15: Class A digital device. Copyright © Jands Pty Ltd. For technical support, visit www.jands.com or contact authorized service centers. Software updates available from manufacturer website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No DMX output	Cable/configuration	Check DMX cables; verify fixture patching; check universe configuration.
Faders not responding	Calibration/power	Run fader calibration; check power supply; restart console.
Display issues	Connections/settings	Check VGA cables; adjust display settings; restart console.
Network not working	Cable/configuration	Verify Ethernet connection; check network settings; restart devices.
Fixture control problems	Profile/addressing	Verify fixture profile; check DMX addressing; update fixture library.

Reset: Use hardware reset if console becomes unresponsive.

Service: Contact authorized Jands service center; www.jands.com