Jands Vista i3 Manual

The Jands Vista i3 is a professional lighting control console featuring a 15-inch touchscreen LCD display, dual DMX outputs, integrated video playback capabilities, motorized faders, customizable user interface, built-in media server, support for multiple DMX protocols, USB connectivity for external storage, Ethernet connectivity for networking, and comprehensive fixture library. Powered by 100-240V AC, 50-60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 15-inch touchscreen LCD, Motorized faders, DMX outputs, USB ports, Ethernet port, Power connector.

Feature	Description
Touchscreen Display	15-inch LCD with multi-touch capability
Motorized Faders	10 motorized faders for precise control
DMX Outputs	Dual DMX512 outputs for lighting control
USB Ports	Multiple USB ports for external storage and backup
Ethernet Port	Network connectivity for remote control and sharing
Power Connector	Universal power input 100-240V AC
Encoder Wheels	High-resolution encoders for parameter adjustment
Fixture Library	Built-in library with thousands of fixture profiles
Video Playback	Integrated media server for video content
Customizable UI	User-configurable interface layouts

Installation

Unpack and inspect contents. Place on stable surface or mount in rack.

1. Connect power: Use supplied power cable to connect to AC power source.
2. Connect DMX outputs: Use XLR cables to connect to lighting fixtures.
3. Connect network: Use Ethernet cable for network connectivity.
4. Connect external devices: Use USB ports for storage and backup.
5. Power on console and verify all connections.

WARNING! Console contains sensitive electronics; handle with care. Ensure proper ventilation and stable power supply.

First-Time Setup

Power on console; follow initial setup wizard.

1. Language selection: Choose preferred interface language.
2. DMX configuration: Set DMX output universe assignments.
3. Fixture setup: Load or create fixture profiles for your rig.
4. Network setup: Configure IP settings for network connectivity.
5. User preferences: Set display brightness, touch sensitivity, and other preferences.

CAUTION! Ensure console is placed on stable surface with adequate ventilation. Avoid exposure to moisture and extreme temperatures.

Specifications

• Display: 15-inch LCD touchscreen, 1280x1024 resolution.
• DMX Outputs: 2 x DMX512 outputs, 512 channels each.
• Control: 10 motorized faders, 8 encoder wheels.
• Connectivity: 4 x USB 2.0, 1 x Ethernet 10/100/1000.
• Memory: 1000 cues, 500 scenes, unlimited shows.
• Power Supply: 100-240V AC, 50-60Hz, auto-switching.
• Operating Temp: 0°C to 40°C (32°F to 104°F).
• Dimensions: 482mm x 350mm x 150mm (19" x 13.8" x 5.9").
• Weight: 8.5 kg (18.7 lbs).

Controls and Settings

Access main menu via touchscreen or dedicated menu button. Front Panel: POWER, MENU, FADER BANKS, ENCODERS, EXECUTORS.

Touchscreen Interface: Main display area, fixture selection, parameter control, cue lists, effects generator.

System Settings: Display brightness, touch sensitivity, DMX configuration, network settings, user profiles. Show Control: Cue programming, timeline editing, effects creation, fixture patching. User Interface: Customizable layouts, workspace organization, shortcut creation.

Connecting Devices

DMX: XLR outputs to fixtures. Network: Ethernet for control and sharing. USB: Storage and backup devices.

1. Turn off console before making connections.
2. Use proper DMX cables for lighting connections.
3. Connect network cable for remote operation.
4. Insert USB devices for show file storage.
5. Verify all connections before powering on.

Tip: Use quality cables and proper termination for reliable DMX signal transmission.

Operating Modes

Supports multiple operating modes for different applications.

1. Live Mode: Real-time control of fixtures and parameters.
2. Program Mode: Create and edit cues, scenes, and effects.
3. Playback Mode: Execute pre-programmed shows and cues.
4. Setup Mode: Configure system settings and fixture profiles.
5. Backup Mode: Create and restore show file backups.
6. Network Mode: Remote control and multi-console operation.

WARNING! Always save show files regularly. Use proper shutdown procedure to prevent data loss.

Programming Features

Advanced programming capabilities for complex lighting designs.

1. Fixture Patching: Assign DMX addresses and create fixture groups.
2. Cue Programming: Create and edit cues with timing and fade parameters.
3. Effects Generator: Built-in effects engine for dynamic lighting.
4. Timeline Editing: Visual timeline for precise cue sequencing.
5. Macro Creation: Record and playback complex command sequences.
6. Color Mixing: Advanced color control including CMY and RGB mixing.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Clean touchscreen with approved screen cleaner and soft cloth.
2. Keep ventilation ports clear of dust and obstructions.
3. Regularly backup show files to external storage.
4. Update software when new versions are available.
5. Check cables and connections for wear or damage.

CAUTION! Do not use harsh chemicals on touchscreen. Power off before cleaning. Avoid liquid contact with electronics.

Regulatory Information

CE compliant: Meets European safety standards. FCC Part 15: Class A digital device; may cause interference in residential areas. RoHS compliant: Free of hazardous substances. Copyright © 2024 Jands Pty Ltd; all rights reserved. For technical support, visit www.jands.com or contact +61 2 9584 0999.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No DMX output	Cable/configuration	Check DMX cables; verify fixture addressing; check output configuration.
Touchscreen unresponsive	Calibration/power	Recalibrate touchscreen; restart console; check power supply.
Fixture not responding	Addressing/profile	Verify DMX address; check fixture profile; test with known working fixture.
Network connection failed	IP settings/cable	Check network cable; verify IP configuration; restart network services.
Show file won't load	File corruption/version	Try backup file; check file compatibility; update software if needed.
Motorized faders not working	Calibration/mechanical	Run fader calibration; check for obstructions; restart console.

Factory Reset: System > Maintenance > Factory Reset (erases all data).

Technical Support: +61 2 9584 0999; www.jands.com