Jandy AquaLink RS PureLink Manual

The Jandy AquaLink RS PureLink is an advanced pool and spa control system featuring wireless remote control capability, integrated automation for pool equipment, compatibility with various pool systems, touchscreen interface, smartphone connectivity, energy management features, and comprehensive system diagnostics. Designed for residential pool and spa applications with 120V/240V compatibility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main control unit, Wireless remote, Touchscreen interface, Power center, Valve actuators, Sensor inputs.

Installation

Unpack and inspect contents. Mount control unit in protected location.

1. Mount control unit: Choose dry, protected location near equipment pad.
2. Connect power: Follow local electrical codes; use proper grounding.
3. Connect pool equipment: Pump, heater, lights, valves to appropriate terminals.
4. Install wireless antenna: Mount in clear location for optimal signal.
5. Connect sensors: Temperature and pressure sensors as required.

WARNING! Installation must be performed by qualified technician. Disconnect power before installation.

First-Time Setup

Power on system; follow on-screen initialization.

1. System initialization: Power on; system will run self-test and initialization.
2. Configure basic settings: Set time, date, and location parameters.
3. Program equipment: Assign functions to relays and configure pump settings.
4. Set temperature limits: Configure pool and spa temperature ranges.
5. Connect mobile app: Download Jandy app and pair with system.

CAUTION! Ensure all electrical connections are secure and properly rated.

Specifications

• Power Requirements: 120V/240V AC, 50/60Hz
• Control Capacity: Up to 12 equipment functions
• Wireless Range: Up to 100 feet line of sight
• Temperature Control: 40°F to 104°F (4°C to 40°C)
• Display: LCD touchscreen with backlight
• Communication: RS-485, wireless RF
• Enclosure Rating: NEMA 3R outdoor rated
• Operating Temp: -4°F to 140°F (-20°C to 60°C)
• Relay Ratings: 16A @ 240VAC

Controls and Settings

Access menu via touchscreen or remote. Main controls: POWER, MENU, SELECT, BACK, FUNCTION keys.

Remote: POWER, MENU, POOL/SPA, LIGHTS, TEMP UP/DOWN, FILTER, CLEAN, AUX buttons.

System Settings: Time/Date, Language, Temperature units, Backlight, Sound. Equipment Settings: Pump speeds, Heater settings, Light modes, Valve positions. Automation: Schedules, Timers, Macros, Scenes. Security: User codes, Child lock, Service mode.

Connecting Devices

Equipment connections: Pump, Heater, Lights, Valves. Auxiliary devices: Water features, Cleaners, Sensors.

1. Turn off main power before connecting devices.
2. Connect pump: Variable speed pump to comm port.
3. Connect heater: Low voltage fireman's switch.
4. Connect lights: Low voltage transformer control.
5. Connect valves: Valve actuator wiring.

Tip: Label all wires during installation for easy identification.

System Operation

Daily operation of pool and spa functions.

1. Power on: Press POWER button on control panel or remote.
2. Select mode: Choose POOL or SPA mode as needed.
3. Adjust temperature: Use TEMP buttons to set desired temperature.
4. Control equipment: Press corresponding function buttons for pump, lights, etc.
5. Set timers: Program filter cycles and equipment run times.
6. Monitor status: Check system status on display.
7. Shutdown: Press POWER to enter standby mode.

WARNING! Never operate system with cover removed. Keep children away from equipment.

Automation Features

Programmable schedules for energy efficiency and convenience.

• Daily Schedules: Program filter pump run times
• Temperature Management: Setback temperatures when not in use
• Lighting Scenes: Pre-programmed light shows and colors
• Valve Programs: Automated valve sequencing
• Cleaner Cycles: Automatic pool cleaner operation
• Vacation Mode: Extended absence settings
• Freeze Protection: Automatic operation in freezing conditions

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Monthly inspection: Check connections and enclosure integrity
2. Display cleaning: Use soft, dry cloth only
3. Battery replacement: Replace remote batteries annually
4. Software updates: Check for firmware updates periodically
5. Winterization: Proper shutdown for cold climates

CAUTION! Disconnect power before performing any maintenance. Use only qualified service technicians.

Regulatory Information

UL 1563 Listed: Swimming pool equipment. FCC Part 15: Class B digital device compliance. CSA C22.2 No. 218.1: Swimming pool equipment standard. Copyright © 2024 Jandy. All rights reserved. Jandy and AquaLink are registered trademarks of Fluidra. For technical support, visit www.jandy.com or contact 1-800-227-1442.

Troubleshooting

Reset: Menu > System > Reset to factory defaults if needed.

Service: 1-800-227-1442; www.jandy.com