Jandy AquaLink Spa Side Remote Manual

The Jandy AquaLink Spa Side Remote is a waterproof control panel designed for spa operation, featuring easy access to temperature control, jet functions, lighting, and filtration cycles. Compatible with Jandy AquaLink RS control systems, it offers intuitive operation with large, backlit buttons, durable construction for outdoor use, and simple installation. Below are key sections for safety, features, installation, operation, programming, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Functions 6. Programming Modes 7. Maintenance 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waterproof housing, backlit LCD display, temperature controls, jet buttons, light controls, filter cycle programming.

Feature	Description
Temperature Control	Adjust spa water temperature (76°F - 104°F)
Jet Controls	Activate/deactivate spa jets and blowers
Light Controls	Control spa lighting (on/off/dimmer)
Filter Cycle	Program filtration schedules
Backlit Display	LED-lit buttons for night visibility
Waterproof Housing	IP68 rated for complete water immersion protection
Mode Selection	Standard, Economy, and Sleep modes
Lock Function	Child safety lock feature
Temperature Display	Current water temperature readout
Status Indicators	Heater, pump, and filter status lights

Installation

Unpack and inspect contents. Ensure compatibility with AquaLink RS system.

Mounting: Choose location on spa wall within easy reach.
Wiring: Connect to AquaLink RS control system using provided cable.
Sealing: Apply waterproof sealant around mounting area.
Testing: Power on and verify all functions work properly.

WARNING! Installation must be performed by qualified technician. Ensure power is disconnected during installation.

First-Time Setup

Power on remote; follow initial configuration steps.

System Recognition: Remote automatically detects AquaLink RS system.
Temperature Calibration: Verify temperature reading matches actual water temperature.
Function Testing: Test all buttons and controls for proper operation.
Programming: Set default filter cycles and temperature preferences.

CAUTION! Do not operate if water temperature exceeds 104°F. Keep children away from controls.

Specifications

Compatibility: Jandy AquaLink RS control systems
Temperature Range: 76°F - 104°F (24°C - 40°C)
Waterproof Rating: IP68 (submersible up to 6 feet)
Display: Backlit LCD with temperature readout
Power Requirements: 12V DC from control system
Operating Temperature: -20°F to 140°F (-29°C to 60°C)
Dimensions: 6.5" x 4.2" x 1.8" (165mm x 107mm x 46mm)
Weight: 1.2 lbs (0.54 kg)

Controls and Functions

Access all functions through front panel buttons. Display shows current status and temperature.

Primary Controls: TEMP UP/DOWN, JETS ON/OFF, LIGHTS ON/OFF, FILTER CYCLE, MODE SELECTION, LOCK BUTTON.

Temperature Control: Adjust in 1° increments. Jet Control: Activate spa jets and air blowers. Light Control: Turn spa lights on/off, adjust brightness. Filter Programming: Set automatic filter cycles (2-12 hours daily). Mode Selection: Standard (full operation), Economy (energy saving), Sleep (quiet operation). Safety Lock: Prevents unauthorized temperature changes.

Programming Modes

Customize operation through various programming modes.

Standard Mode: Full functionality with all features available.
Economy Mode: Reduced pump operation to save energy.
Sleep Mode: Quiet operation with minimal pump cycles.
Filter Programming: Set automatic filtration schedules.
Temperature Limits: Set maximum/minimum temperature boundaries.

Tip: Use Economy mode when spa is not in use to reduce energy consumption.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Monthly Inspection: Check for cracks, fading, or button wear.
Cleaning: Wipe with mild soap and water; avoid harsh chemicals.
Seal Inspection: Verify waterproof seals are intact.
Battery Check: Monitor display brightness (indicates power status).
Connection Verification: Ensure cable connections remain secure.

WARNING! Do not use abrasive cleaners. Disconnect power before cleaning.

Safety Features

Child Safety Lock: Prevents temperature changes. High Temperature Cutoff: Automatic shutdown above 106°F. Low Temperature Protection: Prevents freezing damage. Button Lockout: Disables controls during certain operations.

Care & Cleaning

Use soft cloth with mild detergent. Rinse thoroughly with clean water.

CAUTION! Do not use high-pressure water jets. Avoid solvents and abrasive cleaners.

Regulatory Information

UL Listed: Meets UL 1563 standards for swimming pool equipment. FCC Part 15: Class B digital device compliance. Copyright © 2025 Jandy Products; trademarks of Fluidra USA. For support, visit www.jandy.com or contact 1-800-227-1442.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Power loss/connection	Check power to control system; verify cable connections.
Buttons not responding	Lock mode activated	Disable safety lock; check for error codes on main control panel.
Incorrect temperature	Sensor calibration	Recalibrate temperature sensor; check for obstructions.
Water in housing	Seal failure	Replace waterproof seals; ensure proper mounting.
Jets not activating	Pump/system issue	Check pump status on main control panel; verify jet settings.

Reset: Hold TEMP UP + TEMP DOWN for 10 seconds to reset to factory defaults.

Service: 1-800-227-1442; www.jandy.com