Jandy CL460 Filter Manual

The Jandy CL460 is a high-performance cartridge filter designed for residential swimming pools and spas. With a filtration area of 460 square feet, this filter provides superior water clarity and easy maintenance. The CL460 features a durable construction, easy-access cartridge design, and compatibility with various pump systems. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Durable filter tank, 460 sq ft cartridge element, pressure gauge, drain plug, and multiport valve.

Installation

Unpack and inspect all components. Ensure proper location selection.

1. Select location: Choose level, stable surface near pump and plumbing.
2. Prepare base: Use concrete pad or reinforced decking for stability.
3. Connect plumbing: Use appropriate PVC fittings and cement for connections.
4. Install valve: Connect multiport valve according to flow direction arrows.
5. Secure connections: Tighten all fittings and check for leaks.

WARNING! Filter is heavy; use proper lifting techniques. Ensure all connections are pressure-tight.

First-Time Setup

Prepare filter for initial operation and prime system.

1. Install cartridge: Place clean cartridge element in tank.
2. Lubricate O-ring: Apply silicone lubricant to tank O-ring.
3. Close tank: Secure lid with clamp mechanism.
4. Prime system: Open air relief valve and start pump slowly.
5. Check pressure: Note clean pressure reading for future reference.

CAUTION! Never operate filter without water. Ensure pump is properly primed.

Specifications

• Model: CL460 Cartridge Filter
• Filtration Area: 460 square feet
• Maximum Flow Rate: 120 GPM
• Maximum Pressure: 50 PSI
• Recommended Pump: 1.5 to 2.0 HP
• Connection Size: 2-inch NPT
• Tank Diameter: 24 inches
• Height: 32 inches
• Cartridge Replacement: Part #CLEARWTR460
• Warranty: 3 years limited

Controls and Operation

Monitor filter performance using pressure gauge and follow operating guidelines.

Normal Operation: Clean pressure reading should be 8-15 PSI above initial clean reading when cartridge needs cleaning.

Pressure Monitoring: Check gauge daily; clean cartridge when pressure rises 8-10 PSI above clean pressure. Valve Positions: FILTER (normal operation), BACKWASH (cleaning), RINSE (after backwash), WASTE (bypass filter), RECIRCULATE (pump only), CLOSED (no flow).

Maintenance Procedures

Regular maintenance ensures optimal performance and longevity.

1. Daily: Check pressure gauge reading.
2. Weekly: Inspect for leaks and proper operation.
3. Monthly: Clean cartridge element as needed.
4. Seasonally: Deep clean and inspect all components.
5. Annually: Replace cartridge if worn or damaged.

Tip: Keep maintenance log with pressure readings and service dates.

Filter Cartridge Care

Proper cartridge maintenance extends filter life and performance.

1. Remove cartridge: Turn off pump, release pressure, open tank.
2. Rinse: Use garden hose with spray nozzle to remove surface debris.
3. Soak: Use filter cleaner solution for deep cleaning (follow manufacturer instructions).
4. Rinse thoroughly: Ensure all cleaner is removed from pleats.
5. Inspect: Check for damage, tears, or excessive wear.
6. Reinstall: Place clean, dry cartridge back in tank.

WARNING! Never use high-pressure washers; they can damage cartridge material.

Winterization

Proper winterization prevents freeze damage in cold climates.

1. Drain water: Remove drain plug and open air relief valve.
2. Remove cartridge: Clean, dry, and store in cool, dry place.
3. Protect openings: Cover pipe connections to prevent debris entry.
4. Store properly: Keep in protected area if removing from installation.

CAUTION! Never leave water in filter during freezing conditions.

Safety Information

Always follow safety procedures when working with pool filtration systems.

WARNING! Never open filter under pressure. Turn off pump and release pressure before servicing. Use personal protective equipment when handling chemicals. Ensure proper electrical grounding of all equipment.

Regulatory Information

Jandy CL460 Filter complies with NSF/ANSI 50 standards for swimming pool equipment. Manufactured to meet industry safety and performance requirements. Copyright © 2024 Jandy; trademarks of Fluidra USA. For technical support, visit www.jandy.com or contact 1-800-227-1442.

Troubleshooting

Service: 1-800-227-1442; www.jandy.com