Jandy IAqualink 2.0 Manual

The Jandy IAqualink 2.0 is a smart pool and spa control system that allows remote monitoring and control via web interface and mobile app. It features automated chemical control, temperature management, scheduling, lighting control, water feature operation, and energy-saving modes. Compatible with most pool equipment and integrates with Jandy variable speed pumps, heaters, and sanitizers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mobile App Operation 8. Automation Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Power center, Antenna, RS-485 connectors, Relay terminals, Sensor inputs.

Feature	Description
Wireless Control	Remote access via web and mobile app
Chemical Automation	pH and ORP monitoring and control
Temperature Control	Pool and spa temperature management
Lighting Control	Control pool and spa lights
Pump Control	Variable speed pump integration
Heater Control	Pool and spa heater operation
Scheduling	Automated equipment schedules
Energy Saving Modes	Optimized pump run times
Water Features	Control waterfalls and fountains
Alerts & Notifications	Email and app notifications

Installation

Unpack and inspect contents. Mount power center in dry, protected location.

Mount power center: Choose location near equipment pad with proper clearance.
Connect power: 240V AC connection by qualified electrician.
Connect pool equipment: Wire pumps, heaters, lights to relay terminals.
Connect sensors: Install pH and ORP sensors in plumbing.
Connect antenna: Install for wireless communication.

WARNING! Electrical shock hazard - installation must be performed by qualified professional. Ensure all connections are secure and waterproof.

First-Time Setup

Power on system; follow setup wizard.

Network setup: Connect to Wi-Fi network for remote access.
Equipment configuration: Identify and configure connected pool equipment.
Chemical setup: Calibrate pH and ORP sensors.
Temperature settings: Set desired pool and spa temperatures.
Schedule setup: Create equipment run schedules.
Mobile app: Download IAqualink app and pair with system.

CAUTION! Ensure proper chemical levels before enabling automation. Follow all local electrical codes.

Specifications

Power Requirements: 240V AC, 50/60Hz
Communication: Wi-Fi, RS-485, Wireless
Control Points: Up to 12 relays standard
Sensor Inputs: pH, ORP, temperature, flow
Temperature Range: 40°F to 104°F (4°C to 40°C)
Chemical Control: pH 6.8-8.2, ORP 400-800mV
Mobile App: iOS and Android compatible
Web Interface: Access via any web browser
Operating Environment: Indoor/outdoor rated enclosure

Controls and Settings

Access controls via local panel, web interface, or mobile app.

Local Panel: POWER, MENU, UP/DOWN arrows, SELECT, BACK.

Chemical Settings: pH setpoint, ORP setpoint, calibration, dosing control. Temperature: Pool temp, spa temp, heater control. Scheduling: Equipment timers, filter cycles, cleaning cycles. Lighting: Color modes, brightness, programs. Pump Control: Speed settings, flow rates, energy modes.

Connecting Devices

Power center connections: Pump relays, heater relays, light relays, sensor inputs.

Turn off main power before connecting devices.
Connect pumps to designated relay terminals.
Connect heater to appropriate relay and control wires.
Install sensors in pool plumbing with proper orientation.
Connect auxiliary devices (lights, water features) to available relays.

Tip: Label all connections for easy identification and troubleshooting.

Mobile App Operation

Control system remotely via IAqualink mobile app.

Download app: Available on iOS App Store and Google Play.
Create account: Register with email and create password.
Pair system: Follow in-app pairing instructions.
Dashboard: View pool status, temperatures, chemical levels.
Control: Turn equipment on/off, adjust settings.
Scheduling: Create and modify equipment schedules.
Alerts: Configure notification preferences.
History: View system operation and chemical history.

WARNING! Keep login credentials secure. Monitor system regularly for proper operation.

Automation Features

Chemical Automation: Maintains proper pH and sanitizer levels automatically. Energy Management: Optimizes pump run times for energy savings. Scheduling: Automated equipment operation based on time and conditions. Freeze Protection: Automatically activates pumps during freezing conditions. Vacation Mode: Maintains pool while away with optimized settings.

Maintenance & Care

Regular maintenance ensures optimal performance.

Monthly: Check and clean sensors
Quarterly: Calibrate pH and ORP sensors
Annually: Professional system inspection
As needed: Update firmware and software

CAUTION! Turn off power before performing any maintenance. Use only Jandy-approved replacement parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed for pool and spa equipment control. Copyright © 2024 Jandy; all rights reserved. For technical support, visit www.jandy.com or contact 1-800-227-1442. Follow all local electrical and pool safety codes.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No wireless connection	Wi-Fi signal/configuration	Check Wi-Fi signal strength; verify network settings; restart router.
Chemical levels inaccurate	Sensor calibration	Clean and calibrate sensors; check reagent levels.
Equipment not responding	Power/communication	Check power to equipment; verify relay operation; inspect wiring.
Mobile app not connecting	Internet/account	Verify internet connection; check login credentials; restart app.
Error messages	System faults	Note error code; consult manual; contact technical support.

Reset: Menu > System > Reset to factory defaults if needed.

Service: 1-800-227-1442; www.jandy.com