Jandy Laminar Jets Manual

The Jandy Laminar Jets are premium water feature jets designed for swimming pools and spas, creating smooth, laminar flow streams of water. These jets feature LED lighting options, adjustable flow control, durable construction, and easy installation. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Pool System 7. Operation 8. Lighting Features 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Laminar flow nozzle, LED light housing, flow control valve, mounting bracket, waterproof connectors.

Feature	Description
Laminar Flow Nozzle	Creates smooth, glass-like water streams
LED Lighting	Multi-color LED options with various lighting modes
Flow Control Valve	Adjustable water flow and stream height
Mounting Bracket	Easy installation on pool walls or coping
Waterproof Connectors	Sealed electrical connections for safety
Durable Construction	UV-resistant ABS plastic and stainless steel
Easy Maintenance	Removable nozzle for cleaning
Multiple Colors	Available in various finish options
Quiet Operation	Minimal noise during operation
Energy Efficient	Low power consumption LED lighting

Installation

Unpack and inspect contents. Ensure all components are present and undamaged.

Select installation location: Choose pool wall or coping area with proper clearance.
Mount bracket: Secure mounting bracket using provided hardware.
Connect water supply: Attach to pool return line using appropriate fittings.
Electrical connection: Connect LED wiring to pool lighting transformer.
Test operation: Verify proper water flow and lighting function.

WARNING! Electrical connections must be performed by qualified personnel. Ensure power is disconnected during installation.

First-Time Setup

After installation, perform initial setup and testing.

Water flow adjustment: Turn flow control valve to desired stream height.
Lighting setup: Program LED colors and patterns using controller.
Nozzle alignment: Adjust nozzle angle for optimal water stream.
System integration: Connect to pool automation system if applicable.

CAUTION! Do not operate without water flow. Running dry may damage components.

Specifications

Flow Rate: 10-25 GPM (gallons per minute)
Stream Height: Adjustable up to 8 feet
LED Power: 12V or 120V options available
LED Colors: RGB multi-color with 7 static colors
Connection Size: 1.5" or 2" threaded connections
Materials: UV-resistant ABS, stainless steel hardware
Operating Pressure: 10-30 PSI
Water Temperature: 40°F to 104°F (4°C to 40°C)
Warranty: 2-year limited warranty

Controls and Settings

Manual controls: Flow adjustment valve, nozzle rotation. Remote controls: LED color selection, lighting patterns, synchronization with other water features.

LED Control: Color selection (Red, Green, Blue, White, etc.), Pattern modes (Solid, Color Chase, Fade, etc.), Speed adjustment, Brightness control.

Flow Control: Stream height adjustment, Flow rate fine-tuning, Nozzle direction setting. Automation: Integration with Jandy Aqualink RS systems, Scheduled operation, Remote control compatibility.

Connecting to Pool System

Water connection: Standard pool return fittings. Electrical: 12V transformer connection for LED lighting.

Turn off pool pump and electrical power before connecting.
Install in-line check valve to prevent backflow.
Use appropriate pipe sealant on threaded connections.
Connect LED wires to compatible transformer.
Test for leaks and proper operation.

Tip: Install isolation valves for easy maintenance and service.

Operation

Standard operation procedures for daily use.

Startup: Ensure water flow is established before turning on lighting.
Flow adjustment: Use control valve to set desired stream characteristics.
Lighting control: Select colors and patterns using controller or automation system.
Shutdown: Turn off lighting before stopping water flow.
Seasonal operation: Adjust settings for different seasonal conditions.

WARNING! Never touch LED components when wet or during operation.

Lighting Features

Advanced LED lighting capabilities and programming options.

Feature	Description
Color Selection	7 static colors plus custom color mixing
Lighting Modes	Solid, Color Chase, Fade, Strobe, Party modes
Synchronization	Sync multiple jets for coordinated displays
Remote Control	Wireless remote operation
Automation	Integration with pool control systems
Timer Functions	Scheduled operation and automatic shutoff

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Monthly: Inspect nozzle for debris and clean as needed.
Quarterly: Check electrical connections and seals.
Seasonally: Deep clean nozzle and flow channels.
Annually: Professional inspection recommended.

CAUTION! Use only mild cleaners; avoid abrasive materials that may scratch surfaces.

Regulatory Information

UL Listed and certified to applicable safety standards. Complies with NSF/ANSI 50 standards for pool equipment. Copyright © 2025 Jandy Products; trademarks of Fluidra USA. For technical support, visit www.jandy.com or contact 1-800-227-1442.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No water flow	Clogged nozzle/pump issue	Clean nozzle; check pump operation and valves
Uneven stream	Debris in nozzle	Remove and clean nozzle thoroughly
LED not working	Power/connection issue	Check transformer and wiring connections
Water leakage	Seal failure	Inspect and replace O-rings or seals
Reduced flow	Scale buildup	Clean flow channels and descale if needed
Noisy operation	Air in system	Bleed air from water lines

Reset: Power cycle system to reset LED controller if needed.

Service: 1-800-227-1442; www.jandy.com