Jane PowerTrack 360 Instruction Manual

The Jane PowerTrack 360 is a high-performance fitness treadmill featuring a 360-degree articulating deck, 3.0 HP motor, 20" x 60" running surface, 12 pre-set programs, heart rate monitoring, speed range of 0.5-12 mph, incline range of 0-15%, Bluetooth connectivity, LCD display with workout feedback, built-in speakers, and USB charging port. Powered by 120V AC, 60Hz. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 360-degree articulating deck, LCD console, Safety key, Heart rate sensors, Bluetooth connectivity, USB charging port.

Assembly Instructions

Unpack and inspect all components. Assemble on level surface.

1. Attach upright posts: Secure to base frame using provided bolts.
2. Install console: Connect wiring harness and secure to upright posts.
3. Attach handrails: Secure to console and base frame.
4. Install safety key: Insert into console slot.
5. Plug into AC power.

WARNING! Treadmill is heavy; use two people for assembly. Ensure all bolts are tightened securely.

First-Time Setup

Position treadmill with 2 feet clearance on all sides.

1. Power on: Insert safety key and plug into outlet.
2. Calibrate: Follow on-screen calibration prompts.
3. Set user profile: Enter age, weight, and fitness level.
4. Test safety features: Verify emergency stop function.
5. Connect Bluetooth: Pair with mobile device if desired.

CAUTION! Ensure proper clearance around treadmill. Keep children and pets away during operation.

Specifications

• Motor: 3.0 HP DC
• Speed Range: 0.5-12 mph
• Incline: 0-15% motorized
• Running Surface: 20" x 60"
• Display: 7-inch LCD with metrics tracking
• Programs: 12 pre-set workouts
• Heart Rate: Contact sensors + wireless compatible
• Connectivity: Bluetooth, USB charging
• Power Source: 120V AC, 60Hz
• Weight Capacity: 300 lbs

Controls and Settings

Console controls: START/STOP, SPEED +/- , INCLINE +/-, PROGRAM SELECT, QUICK SPEED buttons.

Remote: Not applicable - all controls on console.

Settings: User profile (age, weight), workout goals, Bluetooth pairing, display brightness, unit preferences (miles/km). Programs: Manual, Hill, Interval, Fat Burn, Cardio, Strength, Random, Custom.

Connecting Devices

Bluetooth: For audio and fitness apps. USB: For device charging.

1. Enable Bluetooth on mobile device.
2. Select "Bluetooth Setup" in console menu.
3. Pair with "Jane PowerTrack 360".
4. Connect USB cable for charging (cable not included).

Tip: Ensure mobile device Bluetooth is discoverable during pairing process.

Workout Programs

12 pre-set programs for various fitness goals.

1. Select program: Press PROGRAM button and scroll with arrows.
2. Manual: Full control over speed and incline.
3. Hill: Simulates hill climbing with varying incline.
4. Interval: Alternates high and low intensity periods.
5. Fat Burn: Maintains target heart rate for fat burning.
6. Cardio: Focuses on cardiovascular endurance.
7. Strength: Builds muscular endurance.
8. Random: Varying workout for variety.
9. Custom: Save personal workout preferences.

WARNING! Always warm up before intense workouts. Consult physician before starting new exercise program.

Safety Features

Safety Key: Immediate stop when removed. Auto-stop: Stops after 20 minutes of inactivity. Emergency Stop: Large red button on console.

Care & Maintenance

Unplug before cleaning. Wipe console with damp cloth. Vacuum under deck. Lubricate deck every 3 months or 150 hours of use.

CAUTION! Do not use harsh chemicals. Keep liquids away from console and motor.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Jane Fitness; trademarks of Jane Fitness Corporation. For support, visit www.janefitness.com or contact 1-800-555-0199.

Troubleshooting

Reset: Unplug for 60 seconds to reset system.

Service: 1-800-555-0199; www.janefitness.com