Janome 10000 Sewing Machine Manual

The Janome 10000 is a high-performance computerized sewing machine with advanced embroidery capabilities, built-in stitches, automatic needle threader, LCD touch screen display, USB connectivity, built-in memory for custom designs, adjustable sewing speed, automatic tension control, and various presser feet options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Settings 6. Connecting Accessories 7. Stitch Selection and Embroidery 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD touch screen, automatic needle threader, built-in embroidery designs, USB port, bobbin winding system, feed dog control, free arm capability.

Feature	Description
LCD Touch Screen	For stitch selection and embroidery design editing
Automatic Needle Threader	Easy threading with push-button operation
Built-in Stitches	Over 200 built-in stitches including utility, decorative, and quilting
USB Port	For importing custom embroidery designs
Built-in Memory	Stores custom designs and stitch patterns
Adjustable Speed Control	Variable sewing speed from slow to fast
Automatic Thread Cutter	Cuts top and bobbin threads automatically
Knee Lifter	Hands-free presser foot lifting
Needle Up/Down	Programmable needle position
Mirror Imaging	Flips designs horizontally or vertically

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot controller: Connect to power port on machine.
Connect power cord: Plug into wall outlet (120V AC, 60Hz).
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow on-screen setup prompts.

Thread machine: Follow threading path indicated on machine.
Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
Select basic stitch: Use touch screen to choose straight stitch.
Test sew: Use scrap fabric to test tension and stitch quality.
Adjust settings: Modify stitch length and width as needed.

CAUTION! Keep fingers away from needle area during operation. Turn off when not in use.

Technical Specifications

Machine Type: Computerized sewing and embroidery machine
Stitch Capacity: 200+ built-in stitches
Embroidery Area: 200mm x 130mm maximum
Needle System: HAx1 SP
Stitch Length: 0-5mm adjustable
Stitch Width: 0-7mm adjustable
Maximum Sewing Speed: 820 stitches per minute
Display: 7-inch color LCD touch screen
Memory: Built-in plus USB expandable
Power Requirements: 120V AC, 60Hz

Controls and Settings

Access functions via LCD touch screen or physical buttons. Front Panel: POWER, START/STOP, REVERSE, NEEDLE UP/DOWN.

Touch Screen: Stitch selection, embroidery design editing, settings menu, file management, help system.

Stitch Settings: Length, width, tension, mirror imaging, memory save/recall. Embroidery: Design selection, resizing, rotation, color sequence editing. System: Language selection, sound volume, screen brightness, factory reset.

Connecting Accessories

USB: For design transfer. Embroidery Unit: Attaches to free arm. Additional Presser Feet: Snap-on installation.

Turn off machine before connecting accessories.
Attach embroidery unit: Slide onto machine until click is heard.
Install presser feet: Lift presser foot lever, align foot with ankle.
Connect USB: Insert USB drive with embroidery designs.

Tip: Ensure machine is powered off when changing presser feet or accessories.

Stitch Selection and Embroidery

Supports utility stitches, decorative stitches, buttonholes, and embroidery designs.

Select stitch: Touch stitch category on screen, choose desired stitch.
Adjust settings: Modify length, width, and tension as needed.
Start sewing: Press foot controller or START/STOP button.
Embroidery setup: Hoop fabric securely in embroidery frame.
Load design: Select from built-in library or import via USB.
Position design: Use arrow keys to move design placement.
Start embroidery: Press start button; machine will stitch automatically.
Color changes: Machine will stop for thread color changes.

WARNING! Keep hands clear of moving parts during embroidery. Monitor machine during operation.

Maintenance Features

Automatic Maintenance: Self-cleaning hook system, automatic lubrication. Manual Maintenance: Bobbin area cleaning, needle plate removal for access.

Care & Cleaning

Unplug before cleaning. Use soft brush to remove lint from bobbin area. Wipe exterior with dry cloth only.

CAUTION! Do not use compressed air; it can force lint deeper into mechanism. Never spray cleaners directly on machine.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Janome; trademarks of Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183. Made in Japan.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot controller is plugged in.
Thread breaking	Tension/needle issues	Rethread machine; check needle for damage; adjust tension.
Uneven stitches	Threading/bobbin	Rethread completely; check bobbin insertion; clean bobbin area.
Embroidery design errors	Hooping/stabilizer	Ensure fabric is hooped tightly; use appropriate stabilizer.
Needle threader not working	Needle position	Ensure needle is in highest position; check for thread jam.
Touch screen unresponsive	Calibration/power	Restart machine; perform screen calibration in settings menu.

Reset: Menu > System > Factory Reset if available (back up designs first).

Service: 1-800-631-0183; www.janome.com