Janome 1100D Manual

The Janome 1100D is a high-performance sewing machine designed for both beginners and experienced sewers. It features 11 built-in stitches, easy stitch selection, automatic needle threader, built-in thread cutter, drop feed for free-motion sewing, adjustable stitch length and width, and a free arm for circular sewing. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Built-in stitches, automatic needle threader, drop feed, free arm, stitch length/width controls, built-in thread cutter.

Feature	Description
Built-in stitches	11 different stitch patterns including straight, zigzag, and decorative
Automatic needle threader	Easy threading with push-button operation
Drop feed	Lower feed dogs for free-motion sewing
Free arm	Removable extension table for circular sewing
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Built-in thread cutter	Convenient thread cutting on machine
Reverse stitch	Reinforce seams with reverse sewing
Bobbin winding	Built-in bobbin winding system
Power switch	Easy on/off operation

Installation & Setup

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging: Remove all protective materials and tape.
2. Attach power cord: Plug into machine and wall outlet.
3. Install foot control: Connect to machine port.
4. Install needle: Follow threading diagram for proper installation.
5. Wind bobbin: Use built-in bobbin winding system.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow basic setup procedures.

1. Thread machine: Follow numbered threading path on machine.
2. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
3. Select stitch: Turn stitch selection dial to desired pattern.
4. Adjust settings: Set stitch length and width as needed.
5. Test sew: Use scrap fabric to test stitch quality.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

• Stitches: 11 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Needle Threader: Automatic push-button
• Feed System: Drop feed with free-motion capability
• Bobbin: Front loading, class 15 transparent
• Free Arm: Yes, with removable extension table
• Power Source: 120V AC, 60Hz
• Machine Weight: Standard portable weight
• Warranty: 25-year limited warranty

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, power switch.

Stitch Selection: Turn dial to select from 11 built-in stitches. Stitch Length: Adjust from 0-4mm for different fabric types. Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Reverse Stitch: Hold button to sew in reverse for seam reinforcement.

Additional features: Automatic needle threader, built-in thread cutter, drop feed lever, free arm conversion.

Stitch Selection

11 built-in stitches for various sewing applications.

1. Straight stitch: Basic sewing and seams
2. Zigzag stitch: Overcasting and decorative work
3. Blind hem stitch: Nearly invisible hems
4. Stretch stitch: For knit fabrics
5. Decorative stitches: Various patterns for embellishment

Tip: Always test stitch on scrap fabric before starting project.

Basic Sewing Operations

Step-by-step guide for common sewing tasks.

1. Thread machine: Follow numbered path; use automatic needle threader.
2. Insert bobbin: Ensure thread pulls counterclockwise.
3. Select stitch: Turn dial to desired pattern.
4. Adjust tension: Based on fabric type and thread.
5. Begin sewing: Place fabric under presser foot, lower foot, and start.
6. Reverse stitch: Hold reverse button at beginning and end of seams.
7. Cut threads: Use built-in thread cutter.

WARNING! Never pull fabric while sewing. Let feed dogs move fabric naturally.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean lint: Remove bobbin case and clean lint regularly.
2. Oil machine: Apply sewing machine oil as directed in manual.
3. Change needle: Replace needle after every project or 8 hours of sewing.
4. Check belt: Ensure drive belt is properly tensioned.

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Janome 1100D.

• General purpose foot
• Zigzag foot
• Buttonhole foot
• Darning/embroidery foot
• Seam ripper/lint brush
• Needles (assorted sizes)
• Bobbins (class 15)
• Screwdriver
• Spool holders

Warranty Information

Janome 1100D comes with 25-year limited warranty. Warranty covers manufacturing defects in materials and workmanship. Does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized Janome dealer with proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot control is connected properly.
Thread breaking	Tension/needle	Check thread tension; replace needle; ensure proper threading.
Skipped stitches	Needle/thread	Replace needle; use correct needle for fabric; check thread quality.
Uneven stitches	Tension/bobbin	Adjust upper tension; check bobbin threading; clean race area.
Machine jams	Thread buildup	Remove bobbin case and clean; check for tangled thread.

Service: Contact authorized Janome service center for repairs.

Support: Visit www.janome.com or contact customer service.