janome 11590 manual

The Janome 11590 is a high-performance sewing machine designed for both beginners and experienced sewers. It features multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonholer, free arm capability, and various presser feet for different sewing techniques. Powered by standard household electricity with built-in LED lighting for enhanced visibility. Below are key sections covering features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory kit with various presser feet, bobbins, needles, and instruction manual.

Feature	Description
Automatic needle threader	Easy threading without eye strain
Built-in stitch patterns	Multiple decorative and utility stitches
Adjustable stitch length	Customizable from 0-4mm
Adjustable stitch width	Customizable from 0-5mm
One-step buttonholer	Automatic buttonhole creation
Free arm capability	For sewing sleeves and cuffs
LED work light	Bright illumination of work area
Drop feed	For free-motion quilting and darning
Reverse stitch	For securing stitches
Speed control	Adjustable sewing speed

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Connect foot pedal: Plug into designated port on machine.
2. Connect power: Attach power cord to machine and wall outlet.
3. Install needle: Loosen needle clamp screw, insert needle with flat side facing back.
4. Wind bobbin: Follow bobbin winding instructions in manual.
5. Thread machine: Use automatic needle threader for easy threading.

WARNING! Ensure machine is unplugged during needle installation and threading to prevent accidental starts.

Basic Operation

Power on machine; LED light will illuminate.

1. Select stitch: Use stitch selection dial to choose desired pattern.
2. Adjust settings: Set stitch length and width according to fabric type.
3. Position fabric: Lower presser foot and begin sewing with foot pedal.
4. Reverse stitching: Use reverse lever to secure beginning and end of seams.
5. Change presser feet: Lift lever to remove and attach different feet as needed.

CAUTION! Always keep fingers away from moving needle. Turn off when not in use.

Specifications

• Machine Type: Electronic sewing machine
• Stitch Patterns: 15 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonholes: One-step automatic
• Needle Positions: Multiple positions available
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Source: 120V AC, 60Hz
• Lighting: Built-in LED light
• Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine. Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, bobbin winder, tension dial.

Stitch Selection: Turn dial to select from 15 built-in stitches including straight, zigzag, stretch, and decorative patterns.

Tension Adjustment: Use tension dial for different fabric types - lower numbers for lighter fabrics, higher for heavier fabrics.

Speed Control: Foot pedal controls sewing speed - gentle pressure for slow, firm pressure for faster sewing.

Stitch Selection

Available stitches include straight stitch, zigzag, blind hem, stretch stitches, and decorative patterns.

1. Straight stitch: For basic sewing and seams (position 1)
2. Zigzag stitch: For finishing edges and decorative work (position 2)
3. Blind hem: For nearly invisible hems (position 3)
4. Stretch stitches: For knit fabrics (positions 4-6)
5. Decorative stitches: For embellishment (positions 7-15)

Tip: Always test stitch on fabric scrap before beginning project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean lint: Remove needle plate and clean bobbin area after each project.
2. Oil machine: Apply sewing machine oil to designated points monthly.
3. Change needle: Replace needle after every 8-10 hours of sewing.
4. Store properly: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Janome 11590:

• Zigzag foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• 4 bobbins
• Needles (assorted sizes)
• Seam ripper
• Brush
• Screwdriver

Safety Information

Important safety precautions for safe operation:

• Always unplug machine when changing needles or not in use
• Keep fingers away from moving needle
• Do not place machine near heat sources or water
• Use only Janome-approved accessories
• Supervise children when machine is in use
• Ensure proper ventilation during extended use

Warranty Information

Janome 11590 comes with 25-year limited warranty covering mechanical parts. Electronic components covered for 2 years. Labor covered for 1 year. Warranty registration required within 10 days of purchase. Keep original receipt as proof of purchase.

For warranty service, contact authorized Janome dealer or visit www.janome.com. Warranty does not cover damage from misuse, improper maintenance, or use of non-Janome accessories.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure machine is plugged in; check foot pedal connection
Thread breaking	Tension/needle issues	Re-thread machine; check tension setting; replace needle
Skipped stitches	Needle/blunt needle	Replace needle; ensure correct needle type for fabric
Uneven stitches	Tension/threading	Re-thread both top and bobbin threads; adjust tension
Machine jamming	Thread buildup	Clean bobbin area; remove tangled threads; re-thread properly
Noise during operation	Lint/dust accumulation	Clean machine thoroughly; oil if necessary

Service: For persistent issues, contact authorized Janome service center at 1-800-631-0183 or visit www.janome.com