janome 124 manual

The Janome 124 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, drop feed for free-motion sewing, and various presser feet for different sewing techniques. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Stitch selection dial, stitch length control, stitch width control, built-in needle threader, reverse stitch button, bobbin winder, presser foot lever.

Feature	Description
Stitch selection dial	Select from multiple built-in stitch patterns
Stitch length control	Adjust stitch length from 0-4mm
Stitch width control	Adjust stitch width from 0-5mm
Built-in needle threader	Easy needle threading assistance
Reverse stitch button	Reinforce stitches at beginning and end
Bobbin winder	Automatic bobbin winding system
Presser foot lever	Raise and lower presser foot
Drop feed mechanism	Enable free-motion sewing
Thread tension dial	Adjust upper thread tension
Power switch	Turn machine on/off

Installation and Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

1. Remove packaging materials and protective covers from machine.
2. Place machine on sturdy table or sewing cabinet.
3. Connect foot control pedal to machine.
4. Plug power cord into electrical outlet.
5. Install needle and thread machine following threading diagram.

WARNING! Keep fingers away from needle area during operation. Always unplug machine when not in use or during maintenance.

First-Time Operation

Power on machine; familiarize yourself with basic controls.

1. Select straight stitch pattern using stitch selection dial.
2. Set stitch length to medium position (2.5mm).
3. Set stitch width to 0 for straight stitch.
4. Thread machine following upper threading path.
5. Wind and insert bobbin following bobbin instructions.
6. Practice on scrap fabric before starting projects.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

• Machine Type: Mechanical sewing machine
• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonholes: 1-step buttonhole
• Needle System: HA-1, 15x1
• Bobbin: Front loading, class 15 transparent
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Source: 120V AC, 60Hz
• Dimensions: Standard home sewing machine size

Controls and Settings

Main controls located on front and side of machine. Stitch selection dial for pattern choice.

Basic Controls: Power switch, stitch selection dial, stitch length control, stitch width control, reverse stitch button, bobbin winder stop.

Stitch Settings: Length (0-4mm), Width (0-5mm), Pattern (straight, zigzag, stretch, decorative). Tension: Adjust upper thread tension dial (2-6 normal range). Special Functions: Reverse stitching, drop feed for darning, built-in needle threader.

Stitch Selection and Patterns

12 built-in stitches including straight, zigzag, stretch, and decorative patterns.

1. Turn stitch selection dial to desired pattern number.
2. Adjust stitch length for fabric thickness and purpose.
3. Adjust stitch width for zigzag and decorative stitches.
4. Test stitch on scrap fabric before sewing project.
5. Use reverse stitch to secure beginning and end of seams.

Tip: Refer to stitch guide in manual for recommended settings for different fabrics.

Threading and Bobbin Winding

Proper threading essential for good stitch quality.

1. Raise needle to highest position using handwheel.
2. Follow numbered threading path from spool to needle.
3. Use built-in needle threader for easy needle threading.
4. Wind bobbin: Place spool on pin, thread through bobbin winder tension.
5. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
6. Pull bobbin thread up through needle plate.

WARNING! Always thread with power off. Ensure proper bobbin direction for smooth operation.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug machine before cleaning or maintenance.
2. Remove needle plate and clean lint from bobbin area.
3. Oil machine according to lubrication points diagram.
4. Wipe exterior with soft, dry cloth.
5. Replace needle regularly (every 8-10 hours of sewing).

CAUTION! Use only recommended sewing machine oil. Never use household oils.

Accessories and Parts

Standard accessories included with Janome 124 sewing machine.

• Zigzag foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• Class 15 bobbins (2)
• Needles (assorted sizes)
• Seam ripper/lint brush
• Screwdriver
• Spool holders (2)

Regulatory Information

UL listed for safety standards. Complies with applicable electrical safety regulations. Copyright © Janome Sewing Machine Co., Ltd. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Warranty information provided with machine purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for rough spots.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct size for fabric.
Uneven stitches	Improper tension/threading	Check upper and bobbin threading; adjust tension.
Machine not feeding	Feed dogs lowered	Raise feed dogs; check for lint buildup.
Motor not running	Power connection/foot control	Check power cord; ensure foot control is plugged in properly.

Service: Contact authorized Janome service center for repairs.

Support: www.janome.com or local authorized dealer