Janome 15000 Manual

The Janome 15000 is a high-performance computerized sewing machine with advanced embroidery capabilities, large sewing area, automatic thread cutter, built-in stitches, USB connectivity, LCD touch screen display, needle threader, speed control, and various presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Large embroidery area, LCD touch screen, Automatic thread cutter, Built-in needle threader, USB port, Various presser feet, Bobbin winding system.

Feature	Description
Embroidery Area	Large 200mm x 300mm embroidery field
LCD Touch Screen	Color display for stitch selection and editing
Automatic Thread Cutter	Cuts top and bobbin threads automatically
Built-in Needle Threader	Easy needle threading mechanism
USB Port	For importing embroidery designs
Presser Feet	Multiple included feet for different functions
Speed Control	Adjustable sewing speed slider
Built-in Stitches	Over 300 built-in stitches and patterns
Bobbin System	Top-loading jam-resistant bobbin
Power Switch	Turns machine on/off

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

1. Connect power: Plug power cord into machine and electrical outlet.
2. Install foot control: Connect foot pedal to machine port.
3. Thread machine: Follow threading diagram for upper thread.
4. Wind bobbin: Use bobbin winding function with included bobbin.
5. Insert bobbin: Place bobbin in bobbin case following directional arrows.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow on-screen setup prompts.

1. Select language: Choose preferred language from setup menu.
2. Thread machine: Use automatic needle threader for easy threading.
3. Test stitches: Use scrap fabric to test basic stitches.
4. Adjust tension: Check stitch formation and adjust tension if needed.
5. Explore functions: Familiarize yourself with touch screen controls.

CAUTION! Keep fingers away from moving needle. Always use proper presser foot.

Specifications

• Sewing Area: Standard sewing field with extension table
• Stitch System: Computerized with memory function
• Speed Control: Adjustable up to 1000 stitches per minute
• Connectivity: USB port for design import
• Display: Color LCD touch screen
• Built-in Stitches: Over 300 stitches including utility, decorative, and embroidery
• Embroidery: Built-in designs with editing capabilities
• Power Source: Standard household electrical outlet
• Weight: Approximately 25 lbs (11.3 kg)

Controls and Settings

Access functions via LCD touch screen or physical buttons. Front Panel: Power switch, Speed control slider, Stitch selection buttons.

Touch Screen: Stitch selection, Embroidery editing, Settings menu, Help functions, Design import.

Stitch Settings: Length, Width, Tension, Mirror image, Memory functions. Embroidery: Design selection, Resizing, Rotating, Color sequencing. System: Language, Sound settings, Screen brightness, Default settings.

Connecting Accessories

USB: For design transfer. Foot Control: Standard pedal connection. Additional Feet: Snap-on system for quick changes.

1. Turn off machine before connecting accessories.
2. Match accessories to proper ports and connections.
3. Secure presser feet with locking mechanism.
4. Test accessory function before beginning project.

Tip: Always use Janome-approved accessories for optimal performance.

Using Embroidery Functions

Supports built-in designs and imported patterns via USB.

1. Select design: Choose from built-in library or import via USB.
2. Hoop fabric: Use appropriate embroidery hoop for project.
3. Position design: Use LCD to position and resize design.
4. Start embroidery: Press start button; machine will stitch automatically.
5. Color changes: Machine will stop for thread color changes.
6. Monitor progress: Watch embroidery process on LCD display.
7. Finish: Remove hoop and trim jump threads.

WARNING! Keep hands away from moving embroidery unit during operation.

Maintenance Features

Automatic Maintenance: Built-in cleaning reminders and lubrication indicators. User Maintenance: Regular bobbin area cleaning, needle replacement, and basic lubrication.

Care & Cleaning

Unplug before cleaning. Use soft brush for lint removal; mild cleaner for exterior.

CAUTION! Do not use compressed air; avoid liquids near electronic components.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © 2025 Janome; trademarks of Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183. Made for household and light commercial use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord connection; ensure power switch is on.
Thread breaking	Tension/thread quality	Check thread path; adjust tension; use quality thread.
Skip stitches	Needle/damaged needle	Replace needle; ensure correct needle type and installation.
Bobbin issues	Winding/insertion	Rewind bobbin; check bobbin insertion direction.
Embroidery errors	Hooping/design file	Rehoop fabric securely; check design file compatibility.

Reset: Menu > Settings > Factory Reset if available.

Service: 1-800-631-0183; www.janome.com