Janome 1600PQC Manual

The Janome 1600PQC is a professional-grade quilting and sewing machine with 1600 stitches per minute capability, built-in needle threader, knee lifter, extended work table, automatic thread cutter, and advanced stitch patterns. Designed for heavy-duty quilting and professional sewing applications. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Professional sewing head, extended work table, built-in needle threader, knee lifter, automatic thread cutter, LED work light.

Feature	Description
Speed Control	Up to 1600 stitches per minute
Needle Threader	Automatic built-in threading system
Knee Lifter	Hands-free presser foot lifting
Thread Cutter	Automatic thread cutting function
Extended Table	Large work surface for quilting
LED Lighting	Bright illumination of work area
Stitch Patterns	Multiple built-in stitch options
Bobbin System	Top-loading jam-resistant bobbin
Feed Dogs	Adjustable drop feed system
Power Switch	Main power control with safety

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

Assemble extended table: Attach to main machine body using provided hardware.
Install foot pedal: Connect to power cord and position for comfortable use.
Thread machine: Follow threading diagram for upper and lower threading.
Connect power: Plug into appropriate electrical outlet.
Install needle: Ensure proper orientation and secure tightly.

WARNING! Machine is heavy; use proper lifting techniques. Ensure stable surface before operation.

First-Time Operation

Power on machine; test basic functions.

Thread machine: Use automatic needle threader for upper thread.
Wind bobbin: Follow bobbin winding instructions carefully.
Test stitches: Use scrap fabric to test various stitch patterns.
Adjust tension: Check stitch formation and adjust as needed.
Practice controls: Familiarize with speed control and knee lifter.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

Stitch Speed: Up to 1600 stitches per minute
Stitch Length: Adjustable 0-5mm
Stitch Width: Up to 7mm
Needle System: HAx1 SP
Presser Feet: Multiple included for various applications
Work Space: Extended table provides large quilting area
Lighting: LED work light
Power Requirements: 120V AC, 60Hz
Machine Weight: Approximately 25.5 lbs
Warranty: Limited manufacturer warranty

Controls and Settings

Main controls: Power switch, foot pedal, stitch length dial, stitch width dial, reverse stitch button.

Advanced Features: Knee lifter for presser foot, automatic thread cutter, built-in needle threader, feed dog control lever.

Stitch Adjustments: Stitch length (0-5mm), stitch width (up to 7mm), thread tension control, presser foot pressure. Special Functions: Reverse stitching, needle up/down position, bobbin winding, speed control slider.

Stitch Selection

Built-in stitch patterns for quilting and sewing applications.

Straight Stitch: Basic forward stitching
Zigzag Stitch: Adjustable width for finishing
Decorative Stitches: Multiple pattern options
Buttonhole: Automatic one-step buttonholes
Quilting Stitches: Specialized patterns for quilting

Tip: Always test stitches on scrap fabric before starting project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil machine according to lubrication points diagram
Monthly: Clean race hook and check for wear
As needed: Replace needle regularly

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Janome 1600PQC:

Extended work table
Multiple presser feet
Knee lifter
Foot pedal and power cord
Instruction manual
Cleaning brush
Oil bottle
Needles
Bobbin case
Screwdrivers

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device. Copyright © Janome America, Inc. All rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure switch is on; test outlet
Thread breaking	Tension/needle	Adjust thread tension; replace needle; check threading
Uneven stitches	Tension/threading	Re-thread machine; adjust upper and lower tension
Needle threader not working	Position/obstruction	Ensure needle is in highest position; check for thread jam
Fabric not feeding	Feed dogs	Check feed dog position; clean under feed dogs
Unusual noise	Lint/mechanical	Clean machine thoroughly; check for loose parts

Service: Contact authorized Janome service center for repairs. Do not attempt internal repairs.

Support: 1-800-631-0183; www.janome.com