Janome 2012 Manual

The Janome 2012 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, automatic needle threading, built-in buttonholer, adjustable stitch length and width, free arm capability, drop feed for free-motion sewing, and easy bobbin winding system. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing machine body, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and instruction manual.

FeatureDescription
Automatic needle threaderEasy threading with lever mechanism
Built-in buttonholerOne-step automatic buttonholes
Free armFor sewing cuffs and sleeves
Drop feedFor free-motion quilting and darning
Stitch selection dialChoose from multiple stitch patterns
Stitch length/width controlAdjustable for different fabrics
Reverse stitch leverFor reinforcing seams
Bobbin winding systemEasy top-loading bobbin
LED lightIlluminates sewing area
Power switchTurns machine on/off

Installation & Setup

Unpack and inspect all contents. Place on stable sewing table.

  1. Connect power: Plug power cord into machine and electrical outlet.
  2. Install foot pedal: Connect to machine port and place on floor.
  3. Thread machine: Follow threading diagram on machine.
  4. Wind bobbin: Use built-in bobbin winding system.
  5. Insert bobbin: Place bobbin in bobbin case following directional arrows.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

Basic Operation

Power on machine; select desired stitch pattern.

  1. Select stitch: Turn stitch selection dial to desired pattern.
  2. Adjust settings: Set stitch length and width as needed.
  3. Position fabric: Lower presser foot over fabric.
  4. Start sewing: Press foot pedal gently to begin.
  5. Reverse stitching: Hold reverse lever to reinforce seams.
  6. Automatic buttonhole: Follow buttonhole foot instructions.

CAUTION! Always use correct needle for fabric type. Replace bent or dull needles immediately.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse stitch lever, power switch.

Stitch Selection: Straight stitch, zigzag, stretch stitches, blind hem, decorative stitches. Stitch Length: 0-4mm adjustment for different fabrics. Stitch Width: 0-5mm for zigzag and decorative stitches. Tension Control: Adjust thread tension dial for balanced stitches.

Stitch Selection

12 built-in stitches for various sewing applications.

  1. Straight Stitch: Basic sewing and quilting
  2. Zigzag Stitch: Overcasting and appliqué
  3. Blind Hem Stitch: Nearly invisible hems
  4. Stretch Stitch: For knit fabrics
  5. Decorative Stitches: Multiple pattern options
  6. Buttonhole Stitch: Automatic one-step

Tip: Test stitches on scrap fabric before starting project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area
  2. Weekly: Oil hook race and moving parts
  3. Monthly: Clean feed dogs and tension discs
  4. As needed: Replace needles and clean exterior

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome recommended oil.

Accessories

Standard accessories included with machine.

AccessoryUse
Zigzag FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootAutomatic buttonholes
Button Sewing FootAttaching buttons
Bobbins (4)Extra bobbins
Needles (3)Spare needles
Seam RipperRemoving stitches
BrushCleaning lint
ScrewdriverNeedle plate removal

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliant. Copyright © 2012 Janome; trademarks of Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183. Made for household use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure switch is on; test outlet.
Thread breakingTension/needleReduce tension; check needle for damage; rethread.
Skipped stitchesNeedle/threadReplace needle; use correct thread; check threading.
Bobbin issuesWinding/insertionRewind bobbin; ensure proper insertion direction.
Uneven stitchesTension/fabricAdjust tension; use stabilizer for stretch fabrics.
Noise during operationLint/mechanicalClean lint from bobbin area; check for loose parts.

Reset: Turn power off and on if electronic issues occur.

Service: 1-800-631-0183; www.janome.com

Janome 2012 Manual © - All Rights Reserved 2025