The Janome 2139N is a versatile mechanical sewing machine designed for home use, featuring 13 built-in stitches, 4-step buttonhole, free arm capability, built-in thread cutter, drop feed for free-motion sewing, stitch length and width adjustment, reverse sewing, and built-in light. Suitable for various fabrics with easy stitch selection dial and simple operation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Mechanical sewing machine, stitch selection dial, free arm, built-in stitches, reverse lever, tension control, presser foot pressure dial.
| Feature | Description |
|---|---|
| Built-in stitches | 13 utility and decorative stitches including straight, zigzag, and stretch stitches |
| 4-step buttonhole | Easy buttonhole creation with four simple steps |
| Free arm capability | Removable accessory compartment for sewing cuffs and sleeves |
| Built-in thread cutter | Convenient thread cutting on the machine |
| Drop feed | For free-motion sewing and darning |
| Stitch length control | Adjustable stitch length from 0-4mm |
| Stitch width control | Adjustable stitch width up to 5mm |
| Reverse sewing lever | For reinforcing stitches at beginning and end of seams |
| Built-in light | Illuminates sewing area for better visibility |
| Tension control | Adjustable upper thread tension |
Unpack and inspect contents. Place on stable surface at comfortable height.
WARNING! Always unplug machine when not in use or when changing needles. Keep fingers away from moving parts.
Power on machine; test stitches on scrap fabric.
CAUTION! Always start with needle in highest position. Keep hands clear of needle area during operation.
Main controls located on front and side of machine. Stitch Selection Dial: Rotate to select desired stitch pattern. Stitch Length Dial: Adjust from 0 (darning) to 4 (longest stitch). Stitch Width Dial: Adjust zigzag width from 0-5mm. Reverse Lever: Hold down for reverse stitching. Tension Dial: Adjust upper thread tension (4-6 for normal fabrics). Presser Foot Pressure: Adjust for different fabric thicknesses.
Additional Features: Built-in thread cutter, bobbin winding system, free arm conversion, drop feed lever, built-in light switch.
13 built-in stitches for various sewing applications:
Tip: Always test stitch on scrap fabric before sewing your project.
Basic sewing operations and special techniques:
WARNING! Always use correct needle for fabric type. Change needle regularly.
Regular maintenance ensures optimal performance. Unplug machine before cleaning.
CAUTION! Use only Janome recommended oil. Do not use compressed air for cleaning.
Standard accessories included with Janome 2139N:
| Accessory | Purpose |
|---|---|
| General Purpose Foot | Basic sewing |
| Zigzag Foot | Zigzag and decorative stitches |
| Buttonhole Foot | Creating buttonholes |
| Blind Hem Foot | Nearly invisible hems |
| Zipper Foot | Installing zippers |
| Bobbin (extra) | Additional bobbins |
| Needles | Assorted sizes |
| Seam Ripper | Removing stitches |
| Brush | Cleaning lint |
| Screwdriver | Needle plate removal |
Janome 2139N comes with 25-year limited warranty covering mechanical parts. Electronic components covered for 2 years. Labor covered for 1 year. Warranty valid only with proof of purchase from authorized dealer. Does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized Janome service center.
Registration: Register your machine online at www.janome.com for extended support.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Needle breaks | Wrong needle size, bent needle, improper insertion | Replace needle; ensure correct insertion; use proper size for fabric |
| Thread bunching | Improper threading, tension issues | Rethread machine; check bobbin; adjust tension |
| Machine won't run | Power issues, foot controller | Check power connection; ensure foot controller is plugged in |
| Uneven stitches | Tension problems, needle issues | Adjust tension; replace needle; check threading |
| Fabric not feeding | Feed dogs lowered, presser foot pressure | Raise feed dogs; adjust presser foot pressure |
| Thread breaking | Tension too tight, old thread, burred needle | Loosen tension; use fresh thread; replace needle |
| Skip stitches | Wrong needle type, bent needle | Use correct needle for fabric; replace needle |
Service: For technical support, contact Janome at 1-800-631-0183 or visit www.janome.com