Janome 2160DC Manual

The Janome 2160DC is a versatile computerized sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in needle plate thread guide, top loading full rotary hook bobbin system, and built-in thread cutter. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop feed lever, stitch selection dial, bobbin winding system, built-in thread cutter.

Feature	Description
Built-in stitches	60 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole sizing and stitching
Automatic needle threader	Easy threading with push-button mechanism
Drop feed	Lower feed dogs for free-motion sewing
Top loading bobbin	Easy access bobbin system with clear cover
Stitch length/width	Adjustable settings for customization
Reverse stitch	Button for reinforcing stitches
Built-in thread cutter	Convenient thread cutting on machine
Needle up/down	Programmable needle position
Speed control	Slider for adjusting sewing speed

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Attach power cord to machine and plug into electrical outlet.
Install foot controller and connect to machine.
Wind bobbin and insert into bobbin case.
Thread machine following numbered guide on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; follow basic setup procedures.

Select straight stitch: Turn stitch selection dial to position 1.
Set stitch length: Adjust to medium setting (2.5).
Thread machine: Follow automatic needle threader procedure.
Insert bobbin: Place wound bobbin in case following directional arrows.
Test sew: Use scrap fabric to practice stitching.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitches: 60 built-in stitches including utility, decorative, and stretch
Buttonhole: One-step automatic buttonhole
Stitch Length: Adjustable up to 5mm
Stitch Width: Adjustable up to 7mm
Bobbin: Top loading, class 15 transparent bobbin
Needle System: HAx1 SP
Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
Power Source: 110V AC, 60Hz
Dimensions: Standard sewing machine size
Weight: Approximately 15 lbs

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Additional Controls: Automatic needle threader, drop feed lever, bobbin winder, thread tension dial, presser foot lever.

Stitch Settings: Length (0-5mm), Width (0-7mm), Pattern selection (1-60). Tension: Adjust for different fabric types. Speed: Controlled by foot pedal or speed control slider. Special Functions: Needle up/down, automatic thread cutter, mirror image stitching.

Stitch Selection

60 built-in stitches for various sewing applications.

Utility Stitches: Straight, zigzag, stretch, overcast (1-20)
Decorative Stitches: Scallops, waves, leaves, flowers (21-45)
Character Stitches: Alphabet and symbols (46-60)
Buttonhole: Position 00 for automatic one-step buttonhole

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Advanced features for specialized sewing techniques.

Automatic Needle Threader: Push down lever and hook thread through guide.
Drop Feed: Lower feed dogs for free-motion quilting or darning.
Buttonhole: Automatic sizing with sensor foot.
Mirror Image: Create symmetrical decorative patterns.
Memory Function: Store frequently used stitch combinations.
Twin Needle: Use for parallel rows of stitching.

WARNING! Do not use bent needles. Always use correct needle type for fabric.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

Clean bobbin area regularly with brush provided.
Oil machine as indicated in manual (specific points only).
Wipe exterior with soft, dry cloth.
Replace needle after 8-10 hours of sewing.
Check and clean feed dogs periodically.

CAUTION! Use only Janome recommended oil. Do not spray cleaners directly on machine.

Regulatory Information

UL Listed: Certified for household use in North America. Copyright © 2025 Janome; trademarks of Janome Sewing Machine Co., Ltd. For support, visit www.janome.com or contact 1-800-631-0183. Made for 110-120V AC operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for burrs on needle.
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin following directional arrows.
Machine not running	Power connection/foot pedal	Check power cord; ensure foot pedal is plugged in properly.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; rethread completely.

Reset: Turn machine off and on to reset computerized functions.

Service: 1-800-631-0183; www.janome.com