Janome 2160QDC Manual

The Janome 2160QDC is a computerized sewing machine with 60 built-in stitches, automatic needle threader, one-step buttonhole, drop feed for free-motion sewing, built-in needle plate thread cutter, top loading bobbin system, and adjustable stitch length/width. Features include start/stop button, speed control slider, reverse stitch button, and LCD display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop feed lever, bobbin winding system, foot pressure dial, and accessory storage.

Feature	Description
Built-in stitches	60 utility, decorative, and stretch stitches
Automatic needle threader	Easy threading with push-pull mechanism
One-step buttonhole	Automatically creates perfect buttonholes
Drop feed	Lowers feed dogs for free-motion sewing
Top loading bobbin	Easy bobbin insertion and viewing
LCD display	Shows selected stitch and settings
Start/stop button	Sew without foot control
Speed control slider	Adjusts maximum sewing speed
Reverse stitch button	Reinforces stitching at beginning/end
Built-in thread cutter	Cuts top and bobbin threads automatically

Installation & Setup

Unpack and inspect contents. Place on stable surface.

1. Remove packaging materials and protective covers.
2. Install foot control: Plug into machine's foot control jack.
3. Connect power: Plug power cord into machine and wall outlet.
4. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
5. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
6. Thread upper thread: Follow numbered threading path on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

Basic Operation

Power on machine; select desired stitch and settings.

1. Select stitch: Turn stitch selection dial to desired pattern.
2. Adjust settings: Use stitch length and width dials as needed.
3. Position fabric: Lower presser foot before sewing.
4. Begin sewing: Press foot control or start/stop button.
5. Reverse stitching: Hold reverse button to reinforce stitches.
6. Cut threads: Use built-in thread cutter or scissors.

CAUTION! Always use correct presser foot for selected stitch. Never pull fabric while sewing.

Specifications

• Stitches: 60 built-in stitches
• Buttonholes: 1 one-step automatic buttonhole
• Needle Positions: Left, center, right
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Bobbin: Top loading, Class 15 transparent
• Needle System: HAx1 standard domestic
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Supply: 110V, 60Hz
• Dimensions: 15.7" x 7.1" x 12.2"
• Weight: 13.2 lbs

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse button.

LCD Display: Shows selected stitch number, recommended foot, stitch length/width settings.

Stitch Selection: Turn dial to select from 60 stitches. Stitch Length: Adjust from 0-5mm. Stitch Width: Adjust from 0-7mm. Reverse: Hold to sew backwards. Start/Stop: Sew without foot control. Speed Control: Limit maximum sewing speed.

Stitch Selection

60 built-in stitches including utility, decorative, and stretch stitches.

1. Utility Stitches: Straight stitch, zigzag, blind hem, overcast
2. Decorative Stitches: Scallops, waves, leaves, flowers
3. Stretch Stitches: Triple stretch stitch, elastic zigzag
4. Buttonhole: One-step automatic with memory function

Tip: Refer to stitch guide on machine for recommended settings and applications.

Advanced Features

Automatic needle threader, drop feed, needle up/down position, built-in thread cutter.

1. Needle Threader: Push lever down and forward, hook thread, pull back.
2. Drop Feed: Lower feed dogs for free-motion quilting or darning.
3. Needle Position: Set needle to stop in up or down position.
4. Thread Cutter: Slide thread into cutter slot on needle plate.
5. Bobbin Warning: LCD indicates when bobbin thread is low.

WARNING! Always raise needle to highest position before using needle threader.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Remove lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs and thread paths.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils and cleaners.

Accessories

Standard accessories included with Janome 2160QDC.

Accessory	Purpose
Zigzag Foot A	General sewing
Zipper Foot E	Installing zippers
Automatic Buttonhole Foot R	Creating buttonholes
Button Sewing Foot M	Sewing on buttons
Class 15 Bobbins (4)	Extra bobbins
Needles (3 assorted)	Replacement needles
Seam Ripper/Lint Brush	Correction and cleaning
Screwdriver	Needle plate removal

Safety Information

Important safety precautions for operating sewing machine.

• Always disconnect power when changing needles, cleaning, or not in use
• Keep fingers away from moving parts and needle area
• Do not operate with damaged power cord or plug
• Use only authorized accessories and replacement parts
• Keep work area well-lit and free from obstructions
• Do not use machine if it has been dropped or damaged

For support, visit www.janome.com or contact authorized service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace with new needle; ensure correct insertion
Thread bunching	Incorrect threading/tension	Rethread completely; check bobbin threading
Skip stitches	Dull needle/wrong needle type	Replace needle; use correct needle for fabric
Machine won't start	Power connection/foot control	Check power cord; ensure foot control plugged in
Uneven stitches	Tension issues/dirty machine	Clean machine; adjust upper tension
Bobbin thread showing	Upper tension too tight	Reduce upper tension; check bobbin case

Reset: Turn power off and on to reset computer functions.

Service: Contact authorized Janome service center for repairs.