Janome 350e Embroidery Machine Manual

The Janome 350e is a professional-grade embroidery machine featuring a large embroidery area, USB connectivity, automatic thread tension, built-in designs, advanced editing capabilities, color touchscreen display, automatic needle threader, built-in memory, and compatibility with various embroidery formats. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Large color touchscreen, USB port, automatic thread cutter, built-in hoop sensors, embroidery foot, bobbin case, and accessory compartment.

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove packaging materials and protective covers from machine.
2. Install embroidery foot and needle according to manual instructions.
3. Connect power cord to machine and plug into appropriate outlet.
4. Wind bobbin and thread machine following threading diagram.
5. Install embroidery hoop and prepare fabric for first test.

WARNING! Machine is heavy; use proper lifting techniques. Ensure stable work surface to prevent tipping.

First-Time Operation

Power on machine; follow initial setup prompts on touchscreen.

1. Select language: Choose preferred language from setup menu.
2. Thread machine: Follow on-screen threading guide and diagrams.
3. Load test design: Select built-in design for initial embroidery test.
4. Hoop fabric: Secure fabric in embroidery hoop with stabilizer.
5. Start embroidery: Press start button and monitor first stitches.
6. Adjust settings: Modify speed, tension, and other parameters as needed.

CAUTION! Keep fingers away from moving parts during operation. Always use proper hoop and stabilizer.

Technical Specifications

• Embroidery Area: 200mm x 300mm (7.9" x 11.8")
• Stitch Speed: Up to 850 stitches per minute
• Built-in Designs: 200+ embroidery designs
• Memory Capacity: Built-in plus USB expandable storage
• Needle System: HAx1 SP 75/11-90/14 embroidery needles
• Thread: Compatible with all major embroidery thread brands
• Display: 7-inch full-color touchscreen LCD
• Connectivity: USB port for design transfer
• Power Requirements: 110-120V, 60Hz (varies by region)
• Machine Dimensions: Standard professional embroidery machine size

Controls and Functions

Access all functions via touchscreen interface and physical control buttons.

Touchscreen Controls: Design selection, editing tools, stitch settings, file management, system preferences.

Physical Controls: Power switch, start/stop button, speed control slider, needle up/down, thread cutter.

Design Editing: Resize, rotate, mirror, combine designs, adjust stitch density. Stitch Settings: Adjust tension, speed, thread trim settings. System: Language, units, sound, screen brightness, maintenance reminders.

Embroidery Operations

Complete workflow from design selection to finished embroidery.

1. Design Selection: Choose from built-in designs or import via USB.
2. Hoop Preparation: Secure fabric with appropriate stabilizer in hoop.
3. Thread Selection: Choose colors and thread types for design.
4. Machine Setup: Install correct needle and thread machine.
5. Positioning: Use laser pointer (if equipped) for precise placement.
6. Test Stitch: Run small section to check tension and placement.
7. Full Embroidery: Start complete embroidery process.
8. Color Changes: Follow prompts for automatic thread color changes.
9. Finishing: Remove hoop and trim jump threads carefully.

Tip: Always use stabilizer appropriate for your fabric type.

Design Editing & Management

Advanced editing capabilities for customizing embroidery designs.

1. Import Designs: Transfer files via USB from computer.
2. Resize: Scale designs up or down within machine limits.
3. Rotate: Change orientation of design elements.
4. Combine: Merge multiple designs into single embroidery.
5. Lettering: Add text with various fonts and styles.
6. Stitch Editing: Modify individual stitch points and patterns.
7. Color Editing: Change thread colors and sequence.
8. Save/Load: Store edited designs in machine memory or USB.

WARNING! Do not resize designs beyond recommended limits to maintain stitch quality.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Clean bobbin area and remove lint buildup.
2. Weekly: Oil moving parts according to lubrication diagram.
3. Monthly: Clean entire machine exterior and check all connections.
4. As Needed: Replace needles, embroidery feet, and other consumables.

CAUTION! Always unplug machine before cleaning or maintenance. Use only recommended cleaning supplies.

Regulatory Information

CE Certified: Complies with European safety standards. UL Listed: Meets North American electrical safety requirements. Copyright © 2025 Janome; all trademarks property of Janome America, Inc. For technical support and warranty service, contact authorized Janome dealers or visit www.janome.com. Customer service: 1-800-631-0183.

Troubleshooting

Reset: System menu > Factory Reset if persistent issues occur.

Service: 1-800-631-0183; www.janome.com