Janome 350e User Manual

The Janome 350e is a versatile electronic sewing machine featuring 35 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection dial. Powered by standard household electricity with variable speed control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electronic sewing machine with stitch selection dial, automatic needle threader, drop feed lever, built-in thread cutter, and accessory storage.

Feature	Description
Built-in stitches	35 stitches including utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole creation with consistent results
Automatic needle threader	Easy threading with push-pull mechanism
Drop feed	Lower feed dogs for free-motion sewing and darning
Built-in thread cutter	Convenient thread cutting on the side of machine
Stitch selection dial	Easy selection of all 35 stitches
Variable speed control	Adjustable sewing speed with foot control
Reverse stitch	Button for reinforcing stitches
Bobbin winding	Built-in bobbin winding system
Accessory storage	Built-in compartment for feet and accessories

Installation

Unpack and inspect contents. Place on stable sewing table.

1. Remove machine from packaging: Lift machine by carrying handle, remove all protective materials.
2. Install foot control: Connect foot control pedal to machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care using carrying handle. Ensure stable surface before operation.

First-Time Setup

Prepare machine for first use with proper threading and bobbin installation.

1. Thread upper thread: Follow numbered threading path on machine.
2. Use needle threader: Push lever down and pull thread through needle eye.
3. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
4. Select first stitch: Turn dial to straight stitch position.
5. Test sew: Use scrap fabric to test machine operation.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

• Stitches: 35 built-in stitches including utility, decorative, and stretch
• Buttonhole: One-step automatic buttonhole
• Needle Threader: Built-in automatic needle threader
• Feed System: Drop feed with lever control
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm for zigzag stitches
• Bobbin: Front loading, class 15 transparent bobbin
• Presser Feet: Snap-on system with multiple included feet
• Power Source: Standard household 120V AC
• Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine. Stitch selection via rotary dial.

Front Panel: Stitch selection dial, reverse stitch button, stitch width dial, stitch length dial.

Side Features: Hand wheel, bobbin winder, thread cutter, drop feed lever, needle position button.

Stitch Settings: Length adjustable 0-4mm, width adjustable 0-5mm. Tension: Adjustable for different fabrics. Needle: Position adjustable with button. Presser Foot: Pressure adjustable for different fabric thicknesses.

Connecting Accessories

Compatible with Janome snap-on presser feet and accessories.

1. Turn off machine before changing accessories.
2. Snap-on feet: Lift presser foot lever, align foot with shank, lower lever to lock.
3. Specialty feet: Zigzag foot, zipper foot, buttonhole foot, blind hem foot included.
4. Additional accessories: Available for quilting, embroidery, and specialty techniques.

Tip: Always use correct presser foot for selected stitch type.

Basic Sewing Operations

Step-by-step guide for basic sewing tasks.

1. Straight stitching: Select stitch 1, adjust length as needed.
2. Zigzag stitching: Select appropriate zigzag stitch, adjust width and length.
3. Reverse stitching: Press and hold reverse button to reinforce seams.
4. Buttonholes: Attach buttonhole foot, select buttonhole stitch, follow automatic sequence.
5. Gathering: Use longer stitch length and increased upper thread tension.
6. Free-motion: Lower feed dogs for quilting and darning.

WARNING! Keep fingers away from moving needle. Always use presser foot when sewing.

Special Functions

Advanced features for specialized sewing techniques.

Drop Feed: Lower feed dogs for free-motion work. Needle Threader: Automatic threading assistance. Stitch Memory: Remembers last used settings. Variable Speed: Foot control adjusts sewing speed. Mirror Imaging: Creates symmetrical decorative stitches.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Remove lint and dust from bobbin area regularly.
2. Oiling: Apply sewing machine oil to designated points as per manual.
3. Needle replacement: Change needle after 8-10 hours of sewing.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL listed for safety standards. Complies with international electrical safety requirements. Copyright © Janome America, Inc. All rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Customer service available at 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot control is plugged in properly.
Thread breaking	Tension/thread quality	Check threading path; reduce tension; use quality thread.
Uneven stitches	Threading/tension	Re-thread both upper and bobbin threads; adjust tension settings.
Needle breaks	Bent needle/wrong size	Replace needle; ensure correct needle for fabric type.
Fabric not feeding	Feed dogs lowered	Check drop feed lever position; raise feed dogs for normal sewing.
Bobbin issues	Incorrect winding/insertion	Rewind bobbin evenly; ensure bobbin inserted with correct thread direction.

Service: Contact authorized Janome service center for repairs. 1-800-631-0183; www.janome.com