Janome 419S Sewing Machine Manual

The Janome 419S is a versatile sewing machine featuring 19 built-in stitches, 4-step buttonhole, free arm capability, drop feed for darning and free-motion sewing, built-in needle threader, stitch length and width adjustment, reverse sewing lever, and built-in thread cutter. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Usage 7. Maintenance and Cleaning 8. Accessories and Attachments 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 19 built-in stitches, free arm, drop feed mechanism, built-in needle threader, stitch adjustment dials, reverse lever, accessory compartment.

FeatureDescription
Built-in stitches19 different stitch patterns including straight, zigzag, and decorative
4-step buttonholeAutomatic buttonhole creation in 4 easy steps
Free arm capabilityRemovable extension table for sewing cuffs and sleeves
Drop feed mechanismFor darning and free-motion sewing
Built-in needle threaderEasy needle threading assistance
Stitch length adjustment0-4mm stitch length control
Stitch width adjustment0-5mm zigzag width control
Reverse sewing leverFor reinforcing stitches at beginning and end
Built-in thread cutterConvenient thread cutting on machine
Power and light switchSingle control for machine power and work light

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

  1. Remove machine from packaging: Lift carefully from carrying case.
  2. Position machine: Place on sturdy table with adequate workspace.
  3. Install foot control: Plug into machine and position on floor.
  4. Connect power: Plug power cord into 120V AC outlet.
  5. Attach accessories: Install standard presser foot and needle.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow setup procedure.

  1. Thread machine: Follow threading diagram; use built-in needle threader.
  2. Wind bobbin: Use built-in bobbin winder with thread from spool.
  3. Insert bobbin: Drop-in bobbin system with clear cover.
  4. Select stitch: Turn stitch selection dial to desired pattern.
  5. Adjust settings: Set stitch length and width as needed.
  6. Test sew: Use scrap fabric to test stitch quality.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse lever, power/light switch.

Stitch Selection: Turn dial to select from 19 built-in stitches. Stitch Length: 0-4mm adjustment for stitch density. Stitch Width: 0-5mm adjustment for zigzag and decorative stitches. Reverse Lever: Hold down for backstitching. Power/Light: Single switch controls machine operation and work light.

Stitch Selection and Usage

19 built-in stitches for various sewing applications.

  1. Straight stitch: For basic sewing and seams (positions 1-3)
  2. Zigzag stitch: For finishing edges and stretch fabrics (position 4)
  3. Blind hem stitch: For nearly invisible hems (position 5)
  4. Elastic stitch: For sewing elastic and stretch fabrics (position 6)
  5. Decorative stitches: Various patterns for embellishment (positions 7-19)
  6. Buttonhole: 4-step process for perfect buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs
  2. Weekly: Oil moving parts as per manual instructions
  3. Monthly: Clean entire machine and check for wear
  4. Needle replacement: Change needle after 8-10 hours of sewing
  5. Professional service: Annual check-up recommended

CAUTION! Unplug machine before cleaning or maintenance.

Accessories and Attachments

Standard accessories included with machine.

AccessoryPurpose
Standard Presser Foot AGeneral purpose sewing
Zigzag Foot BZigzag and decorative stitches
Buttonhole Foot C4-step buttonholes
Sliding Buttonhole FootAlternative buttonhole attachment
Bobbin (4)Extra bobbins for thread colors
Needles (3)Assorted needle sizes
Seam RipperFor removing stitches
BrushFor cleaning lint
ScrewdriverFor needle plate removal

Regulatory Information

UL listed for safety compliance. Manufactured to meet industry standards for home sewing machines. Copyright © Janome America, Inc. All rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot control is plugged in; check outlet
Thread breakingTension/needle issuesRe-thread machine; check needle for damage; adjust tension
Skipped stitchesNeedle/blunt needleReplace needle; ensure correct needle type for fabric
Uneven stitchesThreading/tensionRe-thread upper and lower threads; clean bobbin area
Machine jamsThread buildupRemove needle plate; clean bobbin area; re-thread
Noise during operationLint/lack of oilClean and oil machine; check for loose parts

Service: Contact authorized Janome service center for repairs.

Support: www.janome.com or 1-800-631-0183

Janome 419S Sewing Machine Manual © - All Rights Reserved 2025