Janome 4800 Instruction Manual

The Janome 4800 is a versatile sewing machine featuring 40 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, top-loading bobbin system, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Operations 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: 40 built-in stitches, automatic needle threader, drop feed lever, stitch selection dial, reverse stitch button, bobbin winder, presser foot lever.

Feature	Description
Built-in stitches	40 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole creation
Automatic needle threader	Easy needle threading with lever
Drop feed	Free-motion sewing capability
Stitch length/width	Adjustable for customization
Top-loading bobbin	Easy bobbin insertion and viewing
Reverse stitch	Reinforce seams with button
Built-in thread cutter	Convenient thread cutting on face plate
Presser feet	Multiple feet for different applications
Power switch	Main power control

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Place machine on flat, stable surface at comfortable height.
Connect foot control pedal to machine.
Plug power cord into machine and wall outlet.
Install needle and thread machine following threading diagram.
Wind and insert bobbin.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needle.

First-Time Operation

Power on machine; follow basic setup procedure.

Turn power switch to ON position.
Select straight stitch using stitch selection dial.
Practice on scrap fabric to test tension and stitch quality.
Adjust stitch length and width as needed.
Test reverse stitch function.
Practice with different built-in stitches.

CAUTION! Always start with needle in highest position. Keep work area well-lit and free of obstructions.

Specifications

Stitches: 40 built-in stitches
Buttonhole: One-step automatic
Needle Threader: Automatic
Stitch Length: Adjustable up to 5mm
Stitch Width: Adjustable up to 7mm
Bobbin: Top-loading, Class 15 transparent
Feed System: Drop feed with lever
Power Source: 120V AC, 60Hz
Motor: DC servo motor
Weight: Approximately 15 lbs

Controls and Settings

Main controls: Power switch, stitch selection dial, reverse stitch button, stitch length dial, stitch width dial, presser foot lever.

Additional Features: Automatic needle threader, bobbin winder, thread tension dial, drop feed lever.

Stitch Adjustment: Length (0-5mm), Width (0-7mm), Tension (0-9). Special Functions: Reverse stitching, needle position, free-motion sewing with drop feed. Accessory Storage: Built-in accessory compartment in free arm.

Stitch Selection

40 built-in stitches including utility, decorative, and stretch stitches.

Turn stitch selection dial to desired stitch number.
Refer to stitch chart for stitch applications.
Adjust stitch length and width as needed.
Test stitch on scrap fabric before sewing project.
For buttonholes: Use one-step buttonhole setting.

Tip: Always use appropriate presser foot for selected stitch type.

Basic Sewing Operations

Step-by-step sewing procedure.

Raise presser foot and position fabric.
Lower presser foot onto fabric.
Press foot control to start sewing.
Guide fabric gently without pulling.
Use reverse stitch at beginning and end of seams.
Raise presser foot and remove fabric.
Cut threads using built-in thread cutter.

WARNING! Never pull fabric while needle is in material. Always watch needle area during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning.
Remove needle plate and clean lint buildup.
Clean bobbin area with brush provided.
Oil machine as per manual instructions.
Replace needle regularly (every 8-10 hours of sewing).
Cover machine when not in use.

CAUTION! Use only Janome recommended needles and accessories. Do not use compressed air for cleaning.

Accessories Included

Standard accessories provided with Janome 4800.

Accessory	Purpose
All-purpose foot	General sewing
Zipper foot	Zipper installation
Buttonhole foot	Automatic buttonholes
Blind hem foot	Invisible hemming
Bobbin (4)	Extra bobbins
Needles	Assorted sizes
Seam ripper	Stitch removal
Brush	Lint cleaning
Screwdriver	Needle plate removal

Safety Information

Important safety precautions for sewing machine operation.

Always disconnect power when changing needles or cleaning
Keep fingers away from moving parts and needle
Do not sew over pins
Use proper lighting in work area
Keep machine clean and free of lint
Use only authorized accessories and parts
Supervise children near operating machine

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot control is connected; check power switch.
Thread breaking	Tension/threading	Rethread machine; check tension; use quality thread; replace needle.
Uneven stitches	Threading/tension	Rethread upper and lower threads; adjust tension; check needle.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; clean feed dog area; check presser foot pressure.
Needle breaks	Fabric/needle	Use correct needle for fabric; don't pull fabric; check needle installation.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin inserted correctly; clean bobbin area.

Service: Contact authorized Janome dealer for technical service.

Support: Visit www.janome.com or contact customer service at 1-800-631-0183