Janome 5000Q Manual

The Janome 5000Q is a high-performance computerized sewing machine with 50 built-in stitches, one-step auto-buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, speed control slider, and LCD screen display. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop feed lever, bobbin winding system, presser foot pressure dial, built-in thread cutter.

Feature	Description
Built-in stitches	50 utility, decorative, and stretch stitches
Auto-buttonhole	One-step automatic buttonhole
Needle threader	Automatic needle threading system
Drop feed	Free-motion sewing capability
LCD screen	Displays stitch selection and settings
Speed control	Adjustable sewing speed slider
Stitch length/width	Adjustable stitch dimensions
Built-in thread cutter	Convenient thread cutting at front
Presser foot pressure	Adjustable for different fabrics
Reverse stitch	Reinforcement stitching button

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Connect power: Plug power cord into machine and electrical outlet.
2. Install foot control: Connect foot pedal to machine port.
3. Wind bobbin: Follow bobbin winding instructions in manual.
4. Insert bobbin: Place bobbin in bobbin case following threading diagram.
5. Thread upper thread: Use automatic needle threader for easy threading.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

Basic Operation

Power on machine; follow initial setup procedure.

1. Select stitch: Turn stitch selection dial to desired pattern.
2. Adjust settings: Set stitch length and width as needed.
3. Position fabric: Lower presser foot over fabric.
4. Begin sewing: Press foot control gently to start.
5. Reverse stitching: Press reverse button to secure stitches.
6. Cut threads: Use built-in thread cutter when finished.

CAUTION! Always use correct needle and thread for fabric type.

Specifications

• Stitches: 50 built-in stitches
• Buttonhole: One-step automatic
• Needle Positions: Left, center, right
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Presser Feet: 4 included (zigzag, zipper, buttonhole, blind hem)
• Bobbin: Front loading, Class 15 transparent
• Power Source: Standard household electrical outlet
• Warranty: 25-year limited warranty

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse button.

LCD Display: Shows selected stitch number, recommended presser foot, stitch length and width settings.

Stitch Adjustment: Length (0-4mm), Width (0-5mm), Needle Position (left/center/right). Special Functions: Automatic needle threader, drop feed lever, thread tension dial, presser foot pressure adjustment.

Stitch Selection

50 built-in stitches including straight, zigzag, stretch, and decorative patterns.

1. Utility stitches: Straight, zigzag, blind hem, stretch
2. Decorative stitches: Scallop, honeycomb, feather, cross
3. Buttonhole: One-step automatic with memory
4. Satin stitches: For decorative embroidery effects
5. Overcast stitches: For seam finishing

Tip: Refer to stitch chart for recommended uses and settings.

Advanced Features

Automatic needle threader: Push lever to thread needle automatically. Drop feed: Lower feed dogs for free-motion quilting. Memory buttonhole: Remembers last buttonhole size. Speed control: Adjust maximum sewing speed.

1. Free-motion sewing: Drop feed dogs for quilting and darning
2. Automatic thread cutting: Built-in cutter at front
3. Needle stop position: Set needle up or down
4. Presser foot pressure: Adjust for different fabric thickness

WARNING! Practice new stitches on scrap fabric first.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Unplug before cleaning.

1. Clean lint: Remove bobbin case and clean lint buildup
2. Oil machine: Apply sewing machine oil as directed
3. Needle replacement: Change needle regularly
4. Exterior cleaning: Wipe with soft, dry cloth

CAUTION! Use only sewing machine oil; never spray cleaners.

Accessories

Included accessories: Zigzag foot, zipper foot, buttonhole foot, blind hem foot, seam ripper, lint brush, needles, bobbins, screwdriver, spool caps.

Regulatory Information

UL Listed: Certified for household use. Copyright © Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183. Made in Taiwan. Complies with FCC regulations for Class B digital devices.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure machine is turned on.
Thread breaking	Tension/thread quality	Adjust thread tension; use quality thread.
Skipped stitches	Needle/blunt needle	Replace needle; ensure correct needle type.
Bobbin issues	Winding/insertion	Rewind bobbin; ensure proper insertion.
Uneven stitches	Tension/threading	Rethread machine; check tension settings.

Reset: Turn machine off and on to reset computer.

Service: 1-800-631-0183; www.janome.com