Janome 500e Instruction Manual

The Janome 500e is a professional-grade embroidery machine with advanced features including a large embroidery area, USB connectivity, built-in designs, automatic thread trimming, needle threader, speed control, LCD touch screen display, and compatibility with various embroidery formats. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Embroidery Operation 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD touch screen, embroidery unit, thread spool pins, bobbin winder, USB port, automatic needle threader, built-in designs library.

Feature	Description
LCD Touch Screen	For design selection and machine control
Embroidery Area	Large 200x200mm embroidery field
USB Port	For importing custom embroidery designs
Automatic Thread Trimmer	Cuts top and bobbin threads automatically
Built-in Designs	Over 200 pre-loaded embroidery patterns
Speed Control	Adjustable embroidery speed up to 850 SPM
Needle Threader	Automatic needle threading system
Bobbin Winder	Built-in bobbin winding mechanism
Memory Function	Saves frequently used designs and settings
POWER	Turns machine on/off

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Attach embroidery unit: Align with machine body and secure locking mechanism.
Install thread spools: Place spools on pins and thread through guides.
Wind bobbin: Follow bobbin winding procedure with included bobbin.
Connect to power: Plug into appropriate AC power outlet.

WARNING! Machine contains sharp needles; handle with care. Ensure stable work surface.

First-Time Operation

Power on machine; follow on-screen prompts.

Thread machine: Use automatic needle threader for top thread.
Insert bobbin: Place bobbin in case following directional arrows.
Select design: Browse built-in designs or connect USB device.
Hoop fabric: Secure fabric in embroidery hoop properly.
Start embroidery: Press start button and monitor first stitches.

CAUTION! Keep fingers away from moving needle during operation.

Specifications

Embroidery Area: 200x200mm (7.9x7.9 inches)
Maximum Speed: 850 stitches per minute
Built-in Designs: 200+ embroidery patterns
Needle Positions: Single needle system
Thread Trimming: Automatic top and bobbin thread cutting
Display: LCD color touch screen
Connectivity: USB port for design transfer
Power Source: 110-120V AC, 60Hz
Machine Dimensions: Standard embroidery machine size

Controls and Settings

Access functions via LCD touch screen or physical buttons. Front Panel: POWER, START/STOP, NEEDLE UP/DOWN, THREAD TRIM.

Screen Controls: Design selection, editing functions, stitch settings, memory operations, system settings.

Embroidery Settings: Design size adjustment, rotation, mirroring, color sequence editing. Machine Settings: Speed control, thread tension, needle position, automatic functions. System: Language selection, units (mm/inch), sound settings, factory reset.

Connecting Devices

USB: For design transfer from computer or storage devices.

Turn off machine before connecting USB devices.
Insert USB drive into designated port.
Access USB designs through file browser on touch screen.
Safely eject USB device when transfers complete.

Tip: Use recommended USB drives for optimal compatibility.

Embroidery Operation

Supports various embroidery file formats including JEF, PES, DST.

Select design: Choose from built-in library or USB source.
Edit design: Adjust size, position, rotation as needed.
Hoop fabric: Secure stabilizer and fabric in embroidery hoop.
Start embroidery: Monitor first few stitches for proper registration.
Color changes: Machine will pause automatically for thread changes.
Complete design: Machine trims threads automatically at completion.
Remove hoop: Carefully remove embroidered fabric from hoop.

WARNING! Always use appropriate stabilizer for fabric type.

Maintenance Features

Automatic Maintenance: Built-in cleaning reminders and lubrication indicators. User Maintenance: Regular bobbin case cleaning, needle replacement, surface cleaning.

Care & Cleaning

Unplug before cleaning. Use soft brush for lint removal; wipe surfaces with dry cloth.

CAUTION! Do not use compressed air; avoid liquid cleaners near electronic components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Janome; trademarks of Janome America, Inc. Safety certified by UL standards. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaks frequently	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Design misalignment	Hooping/stabilizer	Re-hoop fabric securely; use appropriate stabilizer.
Machine not reading USB	Format/compatibility	Use FAT32 formatted drives; check file format compatibility.
Bobbin thread showing on top	Tension imbalance	Adjust bobbin tension; check top threading.
Needle hits embroidery hoop	Design positioning	Reposition design within safe embroidery area.

Reset: System menu > Factory Reset if available.

Service: 1-800-631-0183; www.janome.com