The Janome 5124 is a versatile sewing machine designed for home use, featuring 24 built-in stitches, 4-step buttonhole function, drop feed for free-motion sewing, built-in needle threader, top-loading bobbin system, adjustable stitch length and width, free arm for circular sewing, and built-in LED light. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: 24 built-in stitches, free arm design, built-in needle threader, drop feed mechanism, top-loading bobbin system, LED work light.
| Feature | Description |
|---|---|
| Built-in stitches | 24 different stitch patterns including utility, decorative, and stretch stitches |
| 4-step buttonhole | Easy buttonhole creation in four simple steps |
| Drop feed | Lowers feed dogs for free-motion sewing and darning |
| Built-in needle threader | Automatically threads needle for easy setup |
| Top-loading bobbin | Easy access bobbin system with clear cover |
| Free arm | Removable extension table for sewing cuffs and sleeves |
| LED light | Bright illumination of work area |
| Stitch length control | Adjustable from 0-4mm |
| Stitch width control | Adjustable up to 5mm |
| Reverse stitch | Built-in reverse sewing for securing stitches |
Unpack and inspect all components. Place on stable, level surface.
WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.
Power on machine; test basic functions.
CAUTION! Always use correct needle size and type for fabric. Change needle regularly for best results.
Main controls located on front and side of machine.
Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.
Side Controls: Handwheel, bobbin winder, drop feed lever, light switch.
Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for zigzag and decorative stitches. Reverse: Hold button while sewing to reinforce stitches. Tension: Adjust thread tension dial for balanced stitches.
Choose from 24 built-in stitches for various sewing projects.
Tip: Always test stitch on scrap fabric before sewing project.
Regular maintenance ensures optimal performance.
CAUTION! Never use compressed air to clean machine as it can force lint into mechanism.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power connection | Check power cord connection; ensure foot controller is plugged in properly. |
| Thread breaking | Tension/needle | Check thread tension; replace needle; ensure proper threading. |
| Uneven stitches | Threading/tension | Rethread machine; adjust tension; check bobbin insertion. |
| Machine skipping stitches | Needle/bobbin | Replace needle; check bobbin thread; clean bobbin area. |
| Unusual noise | Lint/thread jam | Clean bobbin area; check for thread jam; remove tangled threads. |
Reset: Unplug machine for 30 seconds, then restart.
Service: Contact authorized Janome service center for repairs.
Standard accessories included with Janome 5124:
Janome 5124 comes with limited warranty covering manufacturing defects. Warranty period varies by region. For warranty claims, contact authorized Janome dealer with proof of purchase. Warranty does not cover damage from misuse, improper maintenance, or unauthorized repairs. For support, visit www.janome.com or contact local authorized service center.