Janome 6019QC Instruction Manual

The Janome 6019QC is a versatile mechanical sewing machine featuring 19 built-in stitches, 4-step buttonhole, drop feed for free-motion sewing, built-in needle threader, stitch length and width adjustment, reverse sewing, free arm for cylindrical sewing, and built-in accessory storage. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, free arm, drop feed, needle threader, and accessory compartment.

Installation

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging: Remove all protective materials and tape.
2. Attach extension table: Slide onto free arm until it clicks into place.
3. Connect foot control: Plug into machine's foot control port.
4. Connect power: Plug power cord into machine and wall outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Prepare machine for first use; follow setup procedures.

1. Wind bobbin: Place thread on spool pin, guide thread through tension, wind bobbin.
2. Insert bobbin: Remove extension table, insert bobbin with thread unwinding counterclockwise.
3. Thread upper thread: Follow numbered threading path on machine.
4. Use needle threader: Push lever down and forward to thread needle automatically.
5. Draw up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.

CAUTION! Ensure stable surface; keep fingers away from needle during operation.

Specifications

• Stitches: 19 built-in stitches including utility and decorative
• Buttonhole: 4-step manual buttonhole
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Feed Dogs: Drop feed capability
• Needle System: HAx1 needles (15x1)
• Bobbin: Class 15 transparent bobbin
• Free Arm: Yes, with removable extension table
• Power Source: 120V AC, 60Hz
• Machine Weight: Approximately 13.2 lbs (6 kg)

Controls and Settings

Access controls via front panel and dials. Stitch Selector: Turn to select desired stitch pattern. Stitch Length Dial: Adjust from 0-4mm. Stitch Width Dial: Adjust up to 5mm for zigzag stitches.

Additional Controls: Reverse Sewing Lever, Drop Feed Lever, Handwheel, Power Switch, Foot Control Pedal.

Stitch Selection: Straight stitch (1), Zigzag (2), Elastic stitch (3), Blind hem (4), Multiple zigzag (5), Overedge (6), Stretch stitch (7), Shell tuck (8), Smocking (9), Decorative stitches (10-19). Buttonhole: Four positions marked on stitch selector.

Basic Sewing Operations

Basic sewing techniques and machine operation.

1. Position fabric: Lower presser foot lever to engage tension.
2. Start sewing: Press foot control gently to begin stitching.
3. Guide fabric: Guide fabric gently without pulling or pushing.
3. Reverse stitching: Hold reverse lever to sew backwards for reinforcement.
4. Finishing: Raise needle to highest position, raise presser foot, remove fabric.
5. Thread cutting: Use built-in thread cutter on face plate.

Tip: Practice on scrap fabric first to adjust tension and stitch settings.

Stitch Selection

Select and use different stitch patterns.

1. Straight stitch: Use for basic sewing, topstitching, and basting.
2. Zigzag stitch: Use for finishing edges, appliqué, and stretch fabrics.
3. Blind hem: Use for nearly invisible hems on garments.
4. Elastic stitch: Use for sewing elastic and stretch fabrics.
5. Decorative stitches: Use for decorative sewing and embellishments.
6. Buttonhole: Follow four-step process for perfect buttonholes.

WARNING! Always raise needle before changing stitch patterns. Use appropriate presser foot for each stitch.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily cleaning: Remove lint and dust from bobbin area and feed dogs.
2. Needle replacement: Replace needle after every project or if damaged.
3. Oiling: Apply sewing machine oil to designated points as per manual.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessory Information

Standard accessories included with Janome 6019QC.

Regulatory Information

UL Listed: Complies with UL safety standards. Copyright © 2025 Janome; trademarks of Janome Sewing Machine Co., Ltd. For support, visit www.janome.com or contact 1-800-631-0183. Made in Taiwan. This sewing machine is designed for household use only.

Troubleshooting

Reset: Turn machine off and on if electronic issues occur.

Service: 1-800-631-0183; www.janome.com