Janome 625E Instruction Manual

The Janome 625E is a versatile electronic sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in needle plate window, top loading full rotary hook bobbin system, and multiple presser feet. Powered by standard household electricity. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic sewing machine with LCD display, automatic needle threader, built-in stitch patterns, drop feed mechanism, and multiple accessory feet.

Installation

Unpack and inspect all components. Place on stable, level surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot controller: Plug into machine's foot controller port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install accessories: Attach standard presser foot and thread stand.
5. Insert needle: Ensure flat side faces back, tighten securely.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Setup

Power on machine; follow setup procedures.

1. Thread machine: Follow threading guides printed on machine.
2. Wind bobbin: Use built-in bobbin winder with thread from spool.
3. Insert bobbin: Drop into bobbin case with thread pulling counterclockwise.
4. Select first stitch: Choose straight stitch for initial testing.
5. Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

• Stitch Selection: 60 built-in stitches
• Buttonhole: One-step automatic
• Needle Threader: Automatic push-button
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Bobbin System: Top loading rotary hook
• Feed System: Drop feed with lever control
• Presser Feet: Multiple included (zigzag, zipper, buttonhole, blind hem)
• Power Source: Standard household AC power
• Weight: Approximately 15 lbs (6.8 kg)

Controls and Settings

Access functions via stitch selection dial, LCD display, and control buttons.

Front Panel: Stitch selection dial, stitch width dial, stitch length dial, reverse button, needle up/down button.

LCD Display: Shows selected stitch number, recommended foot, and stitch settings. Stitch Selection: Turn dial to choose from 60 built-in patterns. Stitch Adjustment: Width dial (0-7mm), Length dial (0-5mm). Special Functions: Reverse stitch, needle position, drop feed lever, automatic thread cutter (if equipped).

Stitch Selection

Choose from 60 built-in stitches for various sewing applications.

1. Utility Stitches: Straight, zigzag, stretch, overcast (1-20)
2. Decorative Stitches: Scallops, waves, leaves, flowers (21-45)
3. Character Stitches: Alphabet and symbols (46-60)
4. Buttonhole: Position 25 for automatic one-step buttonhole

Tip: Refer to stitch guide chart for recommended uses and settings.

Basic Sewing Operations

Follow standard sewing procedures for optimal results.

1. Prepare fabric: Press and align edges properly.
2. Select stitch: Choose appropriate pattern for fabric and purpose.
3. Set tension: Adjust for fabric weight (usually 4 for medium fabrics).
4. Begin sewing: Lower presser foot, depress foot controller gently.
5. Guide fabric: Let machine feed fabric; don't pull or push.
6. Reverse: Use reverse button to secure seam ends.
7. Finish: Raise needle, lift presser foot, remove fabric.

WARNING! Always turn handwheel toward you. Never force machine operation.

Buttonhole Function

Create perfect buttonholes automatically with one-step function.

1. Select buttonhole stitch: Turn dial to buttonhole position.
2. Attach buttonhole foot: Replace standard foot with buttonhole foot.
3. Position fabric: Mark buttonhole placement on fabric.
4. Place button: Insert in back of buttonhole foot for size measurement.
5. Sew buttonhole: Machine automatically creates all four sides.
6. Cut opening: Use seam ripper to open buttonhole carefully.

Practice: Make test buttonholes on scrap fabric first.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Remove lint from bobbin area and feed dogs regularly.
2. Oiling: Apply sewing machine oil to hook race as instructed in manual.
3. Needle replacement: Change needle after 8-10 hours of sewing.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome-approved accessories.

Regulatory Information

UL Listed: Complies with US safety standards. CE Marked: Meets European Union requirements. Copyright © Janome America, Inc. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Made for household use. Warranty: Limited 25-year warranty on mechanical parts.

Troubleshooting

Service: Contact authorized Janome service center for repairs. Do not attempt to repair electrical components.

Support: 1-800-631-0183; www.janome.com