Janome 632 Instruction Manual

The Janome 632 is a versatile sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonhole function, free arm capability, drop feed for darning and quilting, built-in LED light, and easy bobbin winding system. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing head with built-in stitch patterns, Bobbin system, Stitch selection dial, Tension control, Presser foot, Free arm capability.

Installation & Setup

Unpack and inspect contents. Place on stable surface.

1. Remove packaging materials and protective covers.
2. Place machine on sturdy table or sewing cabinet.
3. Connect foot control pedal to machine.
4. Plug power cord into electrical outlet.
5. Install needle according to markings.
6. Wind and insert bobbin following threading guide.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

Basic Operation

Power on machine; follow threading diagram.

1. Thread upper thread: Follow numbered guides from spool to needle.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Select stitch: Turn dial to desired stitch pattern.
4. Adjust settings: Set stitch length and width as needed.
5. Begin sewing: Place fabric under presser foot and depress foot control.

CAUTION! Always use correct needle for fabric type. Replace dull or bent needles immediately.

Specifications

• Model: Janome 632
• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm adjustable
• Buttonhole: One-step automatic
• Needle System: HA-1, 15x1
• Bobbin: Front loading, Class 15 transparent
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Source: 110-120V AC, 60Hz
• Machine Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button, Bobbin winder.

Stitch Selection: Turn dial to select from straight, zigzag, stretch, and decorative stitches.

Stitch Length: Adjust from 0 (for darning) to 4mm (basting).

Stitch Width: Adjust zigzag width from 0 to 5mm.

Tension Control: Dial numbered 0-9 for different fabric types.

Presser Foot Pressure: Adjustable for different fabric thicknesses.

Stitch Selection

Available stitch patterns and their applications:

1. Straight stitch: Basic sewing, topstitching
2. Zigzag stitch: Seam finishing, appliqué
3. Three-step zigzag: Elastic, stretch fabrics
4. Blind hem stitch: Nearly invisible hems
5. Stretch stitch: Knits and stretch fabrics
6. Decorative stitches: Multiple pattern options
7. Buttonhole: Automatic one-step

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate to clean lint from bobbin area.
3. Use small brush to remove dust and lint.
4. Oil moving parts as indicated in manual (use sewing machine oil only).
5. Wipe exterior with soft, dry cloth.

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Standard accessories included:

• Zigzag foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• Class 15 bobbins (4)
• Needles (assorted sizes)
• Seam ripper/lint brush
• Screwdriver
• Spool holders (2)

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Service: 1-800-631-0183; www.janome.com