Janome 6600 Sewing Machine Manual

The Janome 6600 is a professional-grade computerized sewing machine with 60 built-in stitches, automatic needle threader, knee lifter, advanced feed system, memory function, and LCD display. Features include one-step buttonhole, drop feed for free-motion sewing, speed control slider, start/stop button, and built-in needle plate thread cutter. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Advanced Features 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, automatic needle threader, knee lifter, drop feed lever, stitch selection dial, speed control slider, start/stop button, reverse button.

FeatureDescription
Built-in Stitches60 stitches including utility, decorative, and stretch
Automatic Needle ThreaderEasy threading with push-button operation
Knee LifterHands-free presser foot lifting
LCD DisplayShows stitch selection, length, width, and settings
Memory FunctionStores custom stitch combinations
One-Step ButtonholeAutomatic buttonhole creation
Drop FeedFree-motion sewing capability
Speed Control SliderAdjustable sewing speed
Start/Stop ButtonSew without foot control
Needle Plate Thread CutterBuilt-in thread cutting convenience

Unpacking and Setup

Remove machine from packaging and inspect all components.

  1. Place machine on stable, flat surface at comfortable working height.
  2. Attach power cord to machine and plug into 120V outlet.
  3. Install foot control pedal if using traditional operation.
  4. Install needle following arrow direction (flat side to back).
  5. Thread machine according to threading diagram.
  6. Wind and install bobbin following manual instructions.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; LCD display will illuminate.

  1. Select basic straight stitch using stitch selection dial.
  2. Practice on scrap fabric to adjust tension and speed.
  3. Test automatic needle threader function.
  4. Experiment with speed control slider for comfortable pace.
  5. Practice using knee lifter for presser foot control.
  6. Test reverse stitching function.

CAUTION! Keep fingers away from moving needle. Always turn off when not in use.

Specifications

Controls and Functions

Main control panel: LCD display, stitch selection buttons, stitch length/width controls, reverse button, needle up/down button.

Front Panel: Handwheel, bobbin winder, thread cutter, presser foot lever, drop feed lever.

Stitch Adjustment: Length (0-5mm), Width (0-7mm), Mirror imaging, Memory storage. Utility Functions: Automatic needle threader, Knee lifter attachment, Start/stop button, Speed control slider, Lock stitch button.

Stitch Selection

Access 60 built-in stitches through selection dial and LCD display.

  1. Turn stitch selection dial to desired stitch category.
  2. Use arrow buttons to select specific stitch pattern.
  3. Adjust stitch length and width as needed.
  4. Test stitch on scrap fabric before sewing project.
  5. Use memory function to save favorite combinations.
  6. Access decorative stitches for embellishment work.

Tip: Refer to stitch guide for recommended uses and settings.

Advanced Features

Professional capabilities for experienced users.

  1. AcuFeed Flex System: Even feeding for multiple layers
  2. Memory Function: Store up to 30 stitch combinations
  3. Mirror Imaging: Create symmetrical stitch patterns
  4. Drop Feed: Free-motion quilting and darning
  5. Knee Lifter: Hands-free presser foot operation
  6. Needle Up/Down: Programmable needle position
  7. Speed Control: Adjust maximum sewing speed
  8. Automatic Thread Cutter: Built-in cutting convenience

WARNING! Practice advanced features on scrap fabric before using on projects.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning or maintenance.
  2. Remove needle plate and clean lint buildup.
  3. Oil machine according to lubrication diagram.
  4. Clean bobbin area after each project.
  5. Check needle regularly for damage or dullness.
  6. Store machine with cover when not in use.

CAUTION! Use only Janome recommended oil. Never spray cleaners directly on machine.

Accessories

Standard included accessories:

AccessoryUse
All-Purpose FootGeneral sewing
Zipper FootZippers and piping
Buttonhole FootAutomatic buttonholes
Overedge FootOvercasting and seam finishing
Blind Hem FootInvisible hemming
Satin Stitch FootDecorative satin stitching
1/4" Seam FootQuilting and piecing
Knee LifterHands-free operation
Additional BobbinsExtra bobbin supply
ScrewdriversNeedle plate removal

Safety Information

Important safety precautions for machine operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Needle breaksIncorrect insertion or bent needleReplace needle; ensure flat side to back; check for proper insertion
Thread bunchingIncorrect threading or tensionRethread completely; check bobbin threading; adjust tension
Machine won't startPower connection or foot controlCheck power cord; ensure foot control is plugged in; check start/stop button
Uneven stitchesDirty feed dogs or incorrect presser footClean feed dogs; ensure proper presser foot for stitch type
Thread breakingOld thread or incorrect needleUse fresh quality thread; match needle size to thread weight
LCD display blankPower issue or main fuseCheck power connection; consult authorized service center

Reset: Turn machine off and on to reset computer functions.

Service: Contact authorized Janome dealer for professional service. Warranty: 25-year limited.

Janome 6600 Sewing Machine Manual © - All Rights Reserved 2025