Janome 6600P Manual

The Janome 6600P is a professional-grade computerized sewing machine with advanced features including 60 built-in stitches, automatic needle threader, one-step buttonhole, speed control slider, knee lifter, and extended sewing space. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, automatic needle threader, drop feed, knee lifter, extended workspace, built-in stitches.

Feature	Description
Built-in Stitches	60 utility, decorative, and stretch stitches
Automatic Needle Threader	Easy threading with push-button operation
One-Step Buttonhole	Automatic buttonhole sizing and stitching
Speed Control Slider	Adjustable sewing speed from 100 to 850 SPM
Knee Lifter	Hands-free presser foot lifting
Extended Workspace	9-inch sewing space for large projects
LCD Display	Digital stitch selection and settings
Drop Feed	Free-motion sewing capability
Memory Function	Store favorite stitch combinations
Start/Stop Button	Sew without foot control

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Attach foot control pedal to machine and power outlet.
3. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
4. Wind bobbin: Place thread on spool pin, follow threading guide.
5. Insert bobbin: Drop-in bobbin system with clear cover.
6. Thread upper thread: Follow numbered threading path.

WARNING! Machine is heavy; lift with care. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Connect power: Plug foot control into machine and wall outlet.
2. Turn power switch to ON position.
3. Select basic straight stitch using stitch selection dial.
4. Test sew on scrap fabric to check tension and stitch quality.
5. Adjust thread tension if needed using tension dial.
6. Practice with different stitch patterns and settings.

CAUTION! Keep fingers away from moving needle. Always use proper needle for fabric type.

Specifications

• Stitches: 60 built-in stitches including utility, decorative, and stretch
• Stitch Width: Up to 7mm
• Stitch Length: Up to 5mm
• Sewing Speed: 100-850 stitches per minute
• Needle Positions: Multiple needle positions including left, center, right
• Workspace: 9-inch extended sewing space
• Bobbin: Top-loading, jam-resistant bobbin system
• Power Source: 120V AC, 60Hz
• Weight: 24.2 lbs (11 kg)
• Dimensions: 18.9" x 8.3" x 12.2"

Controls and Settings

Access functions via LCD display and control buttons. Front Panel: Power switch, stitch selection, reverse stitch, needle up/down.

Control Panel: Stitch selection buttons, stitch length/width adjustment, mirror image, memory function, start/stop button.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), thread tension (0-9), needle position. Advanced: Memory function stores up to 10 stitch combinations, automatic thread cutter, knee lifter sensitivity adjustment.

Stitch Selection

60 built-in stitches organized by category.

1. Utility Stitches: Straight, zigzag, stretch, overcast, blind hem
2. Decorative Stitches: Scallop, feather, leaf, cross, honeycomb patterns
3. Buttonholes: One-step automatic buttonhole in multiple styles
4. Select stitches using stitch selection dial or LCD buttons
5. Adjust stitch length and width for each stitch pattern
6. Use mirror image function for symmetrical designs

Tip: Test stitches on scrap fabric before starting project.

Advanced Functions

Professional features for experienced users.

1. Memory Function: Store and recall favorite stitch combinations
2. Automatic Thread Cutter: One-touch thread cutting
3. Knee Lifter: Raise presser foot without using hands
4. Drop Feed: Free-motion quilting and embroidery
5. Needle Up/Down: Programmable needle position
6. Speed Control: Adjust maximum sewing speed
7. Start/Stop: Sew without foot control
8. Automatic Needle Threader: Easy threading for all needle types

WARNING! Practice advanced functions on scrap fabric before using on projects.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Unplug before cleaning.

1. Clean bobbin area after each project
2. Oil machine according to maintenance schedule
3. Replace needle regularly (every 8-10 hours of sewing)
4. Clean feed dogs with small brush
5. Wipe exterior with soft, dry cloth

CAUTION! Use only Janome recommended oil. Do not use compressed air for cleaning.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace with correct needle type; ensure straight insertion
Thread bunching	Incorrect threading/tension	Re-thread machine; adjust tension; check bobbin
Skip stitches	Dull needle/wrong needle	Replace needle; use correct needle for fabric
Machine won't start	Power connection/foot control	Check power cord; ensure foot control is plugged in
Uneven stitches	Tension issues/thread quality	Adjust upper and bobbin tension; use quality thread

Reset: Turn power off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com