The Janome 7025 is a versatile computerized sewing machine with 25 built-in stitches, one-step auto buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection dial. Features include reverse stitch button, stitch length/width adjustment, top drop-in bobbin system, and accessory storage. Powered by standard household outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Computerized control panel, stitch selection dial, automatic needle threader, drop-in bobbin system, built-in thread cutter, accessory compartment.
| Feature | Description |
|---|---|
| Stitch Selection Dial | Select from 25 built-in stitches including utility and decorative |
| Automatic Needle Threader | Easy threading with push-pull mechanism |
| One-Step Buttonhole | Automatic buttonhole creation in single step |
| Drop Feed | Lever to lower feed dogs for free-motion sewing |
| Built-in Thread Cutter | Convenient thread cutting on machine face |
| Reverse Stitch Button | Reinforce stitching at beginning and end |
| Stitch Length/Width | Adjustable settings for customization |
| Top Drop-in Bobbin | Easy bobbin loading with clear cover |
| Power/Speed Control | Foot pedal with variable speed control |
| Accessory Storage | Built-in compartment for feet and tools |
Remove machine from packaging and inspect all components.
WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.
Power on machine; familiarize with basic functions.
CAUTION! Always disconnect power when not in use. Keep work area well-lit.
Main controls located on front and right side of machine.
Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.
Right Side: Handwheel, bobbin winder, power switch, power cord port.
Needle Area: Needle threader, presser foot lever, thread cutter, drop feed lever.
Stitch Selection: Turn dial to select from 25 stitches (1-6: straight/zigzag, 7-12: stretch, 13-25: decorative). Stitch Length: 0-4mm adjustment. Stitch Width: 0-5mm for zigzag and decorative stitches. Reverse: Hold button for reinforcement stitching.
Choose appropriate stitch for your project using selection dial.
Tip: Always test stitch on scrap fabric before sewing project.
Fundamental sewing operations for beginners.
WARNING! Never pull fabric while sewing - let feed dogs move fabric automatically.
Regular maintenance ensures optimal performance.
Daily: Brush lint from bobbin area and feed dogs. Weekly: Remove needle plate to clean underneath. Monthly: Oil hook race and moving parts (use sewing machine oil only).
CAUTION! Always unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.
Standard included accessories:
Janome 7025 comes with 25-year limited warranty. Warranty covers defects in materials and workmanship. Does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized Janome dealer with proof of purchase.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine not running | Power connection | Check power cord plugged in; ensure power switch is on |
| Thread breaking | Tension/thread quality | Rethread machine; adjust tension; use quality thread |
| Uneven stitches | Threading/needle | Rethread upper and lower; replace bent needle |
| Fabric not feeding | Feed dogs lowered | Raise feed dog lever; clean feed dogs |
| Needle threader not working | Position/timing | Ensure needle in highest position; replace if damaged |
| Bobbin thread bunching | Bobbin insertion | Remove and reinsert bobbin; ensure thread unwinds correctly |
Service: Contact authorized Janome service center for repairs. Customer support: 1-800-631-0183