janome 712t manual

The Janome 712T is a compact electronic sewing machine featuring 12 built-in stitches, 4-step buttonhole, drop feed for free-motion sewing, built-in thread cutter, automatic needle threader, top drop-in bobbin system, stitch length/width adjustment, reverse sewing, and free arm capability. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic sewing machine with built-in stitches, free arm, automatic needle threader, drop feed system.

Feature	Description
Built-in stitches	12 utility and decorative stitches
4-step buttonhole	Easy buttonhole creation
Automatic needle threader	Quick and easy needle threading
Drop feed	Free-motion sewing capability
Top drop-in bobbin	Easy bobbin loading and viewing
Built-in thread cutter	Convenient thread cutting
Free arm	For sewing sleeves and cuffs
Stitch length adjustment	Customizable stitch length
Stitch width adjustment	Adjustable stitch width
Reverse sewing	Reinforce seams

Installation & Setup

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging and place on flat, stable surface.
2. Install foot controller: Plug into machine port.
3. Connect power: Plug power cord into machine and electrical outlet.
4. Wind bobbin: Follow bobbin winding instructions.
5. Insert bobbin: Place bobbin in top drop-in bobbin case.
6. Thread machine: Follow threading path indicated on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off machine when threading or changing accessories.

Basic Operation

Power on machine; select desired stitch and settings.

1. Turn power switch to ON position.
2. Select stitch: Use stitch selection dial to choose desired pattern.
3. Adjust stitch length/width: Use adjustment dials as needed.
4. Place fabric under presser foot and lower foot lever.
5. Press foot controller to begin sewing.
6. Use reverse button to reinforce stitches at beginning and end.

CAUTION! Always use correct needle and thread for fabric type. Replace dull or bent needles immediately.

Specifications

• Stitches: 12 built-in stitches
• Buttonhole: 4-step manual buttonhole
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Needle Positions: Center and left
• Bobbin: Top drop-in system, Class 15 transparent bobbin
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Supply: 110V, 60Hz
• Machine Dimensions: Compact design for easy storage
• Weight: Lightweight for portability

Controls and Settings

Main controls: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse button, bobbin winder.

Stitch Selection: Turn dial to select from 12 built-in stitches. Stitch Length: Adjust from 0-4mm. Stitch Width: Adjust from 0-5mm. Reverse: Hold button for reverse sewing. Bobbin Winder: Push bobbin to right for winding.

Special Features: Automatic needle threader, drop feed lever, free arm conversion, built-in thread cutter.

Stitch Selection

12 built-in stitches for various sewing applications.

1. Straight stitch: For basic sewing and seams
2. Zigzag stitch: For finishing edges and decorative work
3. Blind hem stitch: For nearly invisible hems
4. Stretch stitch: For knit fabrics
5. Decorative stitches: For embellishment
6. Button sewing: Automatic button attachment

Tip: Always test stitch on scrap fabric before sewing project.

Buttonhole Function

4-step buttonhole creation process.

1. Attach buttonhole foot and mark buttonhole position on fabric.
2. Set stitch selector to step 1 (right side) and sew right side of buttonhole.
3. Set to step 2 (bartack) and sew front bartack.
4. Set to step 3 (left side) and sew left side of buttonhole.
5. Set to step 4 (bartack) and sew back bartack.
6. Cut buttonhole open using seam ripper or buttonhole cutter.

WARNING! Always use buttonhole foot for perfect buttonholes. Practice on scrap fabric first.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project.
2. Oil machine as indicated in manual (specific points only).
3. Replace needle regularly (after 8-10 hours of sewing).
4. Clean exterior with soft, dry cloth.
5. Store machine covered when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oil.

Accessories

Standard accessories included with Janome 712T.

• Zigzag foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• Class 15 bobbins (2)
• Needles (assorted sizes)
• Seam ripper/buttonhole cutter
• Brush
• Screwdriver
• Instruction manual

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot controller is plugged in properly.
Thread breaking	Tension/needle	Check thread tension; replace needle; ensure proper threading.
Skip stitches	Needle/thread	Replace needle; use correct needle for fabric; check threading.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; check presser foot pressure.
Uneven stitches	Tension	Adjust upper tension; check bobbin threading.
Machine noisy	Lint/thread	Clean lint from bobbin area; check for thread caught in mechanism.

Service: Contact authorized Janome service center for repairs.

Support: Visit www.janome.com or contact customer service.