janome 8002dx manual

The Janome 8002DX is a professional-grade sewing machine with advanced features including 200 built-in stitches, automatic needle threader, drop feed for free-motion sewing, built-in memory for stitch patterns, adjustable stitch length and width, automatic buttonholer, speed control slider, LCD display, knee lifter, and hard cover case. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop feed lever, bobbin winder, speed control slider, knee lifter socket, accessory storage.

Feature	Description
Built-in stitches	200 decorative, utility, and stretch stitches
Automatic needle threader	Easy threading with push-button operation
Drop feed mechanism	For free-motion quilting and darning
Memory function	Stores up to 50 stitch patterns
LCD display	Shows stitch selection and settings
Speed control slider	Adjustable sewing speed from 200-850 SPM
Automatic buttonholer	One-step perfect buttonholes
Knee lifter	Hands-free presser foot lifting
Needle up/down	Programmable needle position
Built-in thread cutter	Automatic thread cutting function

Unpacking and Setup

Remove all packaging materials and inspect contents. Place on stable sewing table.

1. Remove machine from packaging: Lift machine by base, not handwheel.
2. Install foot controller: Plug into machine and power outlet.
3. Attach power cord: Connect to machine and wall outlet.
4. Install accessories: Snap on presser foot, insert bobbin, thread machine.
5. Position machine: Ensure adequate lighting and ventilation.

WARNING! Machine is heavy; lift with both hands. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Thread machine: Use automatic needle threader for easy threading.
2. Insert bobbin: Follow directional arrows for proper insertion.
3. Select basic stitch: Turn dial to straight stitch position.
4. Test sew: Use scrap fabric to check tension and stitch quality.
5. Adjust settings: Use LCD display to modify stitch length and width.

CAUTION! Always turn off power when changing needles or performing maintenance.

Technical Specifications

• Stitch Capacity: 200 built-in stitches
• Sewing Speed: 200-850 stitches per minute
• Needle Positions: Left, center, right adjustable
• Stitch Length: 0-5mm adjustable
• Stitch Width: 0-7mm adjustable
• Presser Feet: 7 included snap-on feet
• Bobbin: Class 15 transparent
• Power Requirements: 110V, 60Hz
• Machine Dimensions: 16.5"W x 7.5"H x 12"D
• Weight: 18.5 lbs

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, reverse button, needle up/down button.

LCD Display: Shows stitch number, length, width, and memory functions. Stitch Selection: Turn dial to choose from 200 stitches. Memory: Store and recall custom stitch combinations.

Basic Controls: Start/stop button, speed control slider, thread cutter button. Advanced: Mirror imaging, stitch elongation, pattern combination.

Stitch Selection and Memory

200 built-in stitches including utility, decorative, and stretch stitches.

1. Select stitch: Turn dial to desired stitch number.
2. Adjust settings: Use length and width buttons for customization.
3. Save to memory: Press MEMORY button to store settings.
4. Recall memory: Access stored patterns from memory bank.
5. Combine stitches: Create custom stitch sequences.

Tip: Test new stitches on scrap fabric before sewing project.

Advanced Sewing Techniques

Supports various sewing applications including quilting, embroidery, and garment construction.

1. Free-motion sewing: Drop feed dogs for quilting and darning.
2. Buttonholes: Automatic one-step buttonholes in multiple styles.
3. Monogramming: Use alphabet stitches for personalization.
4. Decorative stitching: Access 100+ decorative patterns.
5. Stretch stitches: Special stitches for knit fabrics.
6. Zipper installation: Use zipper foot for perfect application.
7. Blind hem: Create invisible hems with specialty foot.
8. Gathering: Use special stitch for even gathering.

WARNING! Always use appropriate presser foot for each technique.

Maintenance and Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Daily: Brush lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs and thread path.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Use only Janome-approved needles and accessories.

Accessories and Parts

Standard accessories included with Janome 8002DX.

Accessory	Quantity	Use
All-purpose foot	1	General sewing
Zipper foot	1	Zipper installation
Buttonhole foot	1	Automatic buttonholes
Blind hem foot	1	Invisible hems
Overedge foot	1	Edge finishing
Satin stitch foot	1	Decorative stitching
Class 15 bobbins	4	Bobbin winding
Needles	5	Replacement needles
Seam ripper	1	Stitch removal
Brush	1	Lint cleaning

Warranty Information

Janome 8002DX comes with 25-year limited warranty on mechanical parts and 5-year limited warranty on electronic components. Warranty covers defects in materials and workmanship under normal household use. Registration required within 30 days of purchase. For warranty service, contact authorized Janome dealer with proof of purchase.

Troubleshooting Guide

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot controller is plugged in properly.
Thread breaking	Tension/needle	Re-thread machine; check needle for damage; adjust tension.
Skip stitches	Needle/blunt needle	Replace needle; ensure correct needle type for fabric.
Bobbin thread bunching	Bobbin insertion	Remove and reinsert bobbin; check threading direction.
Uneven stitches	Tension settings	Adjust upper and lower tension; clean tension discs.
Machine jams	Thread buildup	Turn off power; remove fabric; clean bobbin area.
Noise during operation	Lint/lack of oil	Clean and oil machine; check for loose parts.
Needle threader not working	Position/timing	Ensure needle is in highest position; check threader mechanism.

Reset: Turn machine off and on to reset electronic functions.

Service: Contact authorized Janome service center for repairs.