Janome 8050 Instruction Manual

The Janome 8050 is a versatile computerized sewing machine featuring 50 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in needle plate thread cutter, top loading full rotary hook bobbin system, and multiple presser feet options. Powered by standard household AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, automatic needle threader, stitch selection dial, bobbin winding system, presser foot lever, feed dog control, and built-in LED light.

Installation

Unpack and inspect contents. Place on stable sewing table.

1. Remove all packaging materials and protective covers
2. Install foot controller: Plug into machine front port
3. Connect power: Plug power cord into machine and wall outlet
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back
5. Wind bobbin: Follow bobbin winding instructions

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Setup

Power on machine; follow initial setup procedures.

1. Thread machine: Follow numbered threading guide on machine
2. Insert bobbin: Place bobbin in case with thread pulling counterclockwise
3. Select stitch: Turn stitch selection dial to desired pattern
4. Test sew: Use scrap fabric to test stitch settings
5. Adjust tension: Check stitch formation and adjust if needed

CAUTION! Ensure machine is on stable surface. Keep work area well-lit and free of obstructions.

Specifications

• Stitches: 50 built-in stitches including utility, decorative, and stretch
• Buttonhole: One-step automatic buttonhole
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Needle Threader: Automatic push-button system
• Bobbin: Top loading rotary hook system
• Presser Feet: Multiple feet included (zigzag, zipper, buttonhole, etc.)
• Power Source: Standard household AC power
• Speed: Up to 820 stitches per minute
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls, reverse stitch button.

Control Panel: Stitch pattern display, automatic needle threader button, bobbin winding guide, LED light switch.

Stitch Selection: Turn dial to select from 50 built-in patterns. Stitch Adjustment: Use width and length dials for customization. Tension Control: Adjust upper thread tension dial. Feed Dog: Lower for free-motion sewing. Presser Foot Pressure: Adjustable for different fabric types.

Connecting Accessories

Foot Controller: Plug into front port. Additional Feet: Snap on presser foot holder. Extension Table: Attach to free arm for larger projects.

1. Turn off machine before changing accessories
2. Align presser foot with holder and lower lever to lock
3. Ensure proper attachment before beginning to sew
4. Test accessory function on scrap fabric first

Tip: Always use genuine Janome accessories for optimal performance and safety.

Basic Sewing Operations

Supports various fabrics and sewing techniques.

1. Straight stitch: Select stitch pattern 1, adjust length as needed
2. Zigzag stitch: Select appropriate zigzag pattern for fabric type
3. Buttonhole: Position fabric, select buttonhole stitch, machine completes automatically
4. Reverse stitching: Hold reverse button to reinforce seams
5. Free-motion: Lower feed dogs for quilting or decorative work
6. Gathering: Use longer stitch length with tightened upper tension
7. Blind hem: Use blind hem foot and appropriate stitch pattern
8. Zipper installation: Use zipper foot for precise placement

WARNING! Never pull fabric while sewing. Let feed dogs move fabric naturally.

Advanced Features

Needle Up/Down: Programmable needle position. Mirror Imaging: Flip stitch patterns horizontally. Memory Function: Store frequently used stitch combinations.

Care & Maintenance

Unplug before cleaning. Regular oiling and lint removal required.

1. Clean bobbin area after each project
2. Oil hook race and moving parts monthly
3. Wipe exterior with soft, dry cloth
4. Replace needle regularly (every 8-10 hours of sewing)
5. Store with cover to prevent dust accumulation

CAUTION! Use only recommended sewing machine oil. Never use household oils.

Regulatory Information

UL Listed: Complies with US safety standards. CE Certified: Meets European Union requirements. Copyright © 2025 Janome; trademarks of Janome Sewing Machine Co., Ltd. For support, visit www.janome.com or contact authorized service centers.

Troubleshooting

Reset: Turn machine off and on to reset computerized functions.

Service: Contact authorized Janome service center; www.janome.com