Janome 9000 Memory Craft Manual

The Janome 9000 Memory Craft is a high-performance computerized sewing machine featuring advanced embroidery capabilities, built-in stitches, automatic thread cutter, needle threader, LCD touch screen display, memory function for storing custom designs, speed control, and various presser feet for different sewing techniques. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD touch screen, automatic needle threader, built-in thread cutter, embroidery unit, feed dog control, speed control slider, memory card slot, USB port.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Attach embroidery unit: Align and click into position.
3. Install foot controller: Plug into designated port.
4. Connect power cord to machine and electrical outlet.
5. Wind bobbin and thread machine according to diagram.

WARNING! Keep fingers away from needle area during operation. Always turn off power when changing needles or presser feet.

Basic Operation

Power on machine; follow on-screen prompts for initial setup.

1. Thread machine: Use automatic needle threader for easy threading.
2. Insert bobbin: Follow directional arrows for proper placement.
3. Select stitch: Use touch screen to choose desired stitch.
4. Adjust settings: Modify stitch length, width, and tension as needed.
5. Begin sewing: Use foot controller or start/stop button.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

• Stitch Capacity: Over 200 built-in stitches
• Embroidery Area: 200mm x 200mm maximum
• Maximum Speed: 850 stitches per minute
• Needle Positions: Adjustable left/right
• Memory: Built-in plus expandable via memory card
• Display: Full-color LCD touch screen
• Bobbin: Top-loading, jam-proof
• Power Source: Standard household electrical outlet
• Weight: Approximately 15 kg

Controls and Functions

Access functions via LCD touch screen or physical buttons. Front Panel: Power switch, thread cutter, needle up/down, reverse stitch.

Touch Screen: Stitch selection, embroidery designs, settings, memory functions, help menu.

Stitch Settings: Length (0-5mm), width (0-7mm), tension (0-9). Embroidery: Design selection, editing, resizing, rotation. Memory: Save/load custom settings, import designs via USB/memory card. Utility: Needle position, thread cutter, speed control, mirror imaging.

Stitch Selection

Over 200 built-in stitches including utility, decorative, and quilting stitches.

1. Press stitch category icon on touch screen.
2. Scroll through available stitches.
3. Select desired stitch by touching it.
4. Adjust settings: length, width, tension as needed.
5. Save frequently used stitches to memory for quick access.

Tip: Test stitch on scrap fabric before starting project.

Embroidery Features

Built-in embroidery designs plus capability to import custom designs.

1. Attach embroidery unit and hoop fabric securely.
2. Select embroidery mode from main menu.
3. Choose design from library or import via USB/memory card.
4. Position design using alignment tools on screen.
5. Start embroidery: Machine will stitch automatically.
6. Change colors when prompted by machine.
7. Remove hoop and trim jump threads when complete.

WARNING! Always use embroidery foot and proper stabilizer. Keep hands away from moving parts during embroidery.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean lint from bobbin area after each project.
2. Oil moving parts as indicated in maintenance schedule.
3. Wipe exterior with soft, dry cloth.
4. Replace needle regularly (every 8-10 hours of sewing).
5. Check and clean feed dogs periodically.

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome-approved oils and accessories.

Accessories

Standard accessories included: Various presser feet, bobbins, needles, seam ripper, lint brush, screwdrivers, spool caps.

Regulatory Information

CE certified for European market. Complies with relevant safety standards for household sewing machines. Copyright © 2025 Janome. All rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Serial number located on machine base.

Troubleshooting

Reset: Turn machine off and on to reset computer system.

Service: Contact authorized Janome service center for repairs.