Janome 9500 Manual

The Janome 9500 is a high-performance computerized sewing machine featuring 250 built-in stitches, automatic needle threader, advanced needle plate, built-in sewing advisor, superior feed system, automatic thread cutter, memory function for stitch patterns, speed control slider, start/stop button, drop feed for free-motion sewing, and built-in monogramming fonts. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, drop-in bobbin system, built-in stitch patterns, speed control, memory function.

Feature	Description
Built-in stitches	250 decorative, utility, and quilting stitches
Automatic needle threader	Easy threading with push-button operation
LCD display	Shows stitch selection and settings
Automatic thread cutter	Cuts top and bobbin threads with button press
Memory function	Stores custom stitch combinations
Speed control slider	Adjustable sewing speed from slow to fast
Start/stop button	Sew without foot control
Drop feed	Free-motion sewing capability
Built-in monogramming	3 alphabet fonts for personalization
Needle up/down	Programmable needle position

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Install foot control: Plug into machine port.
Connect power: Plug power cord into machine and electrical outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow threading path indicated on machine.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select basic stitch: Choose straight stitch for initial testing.
Test sew: Use scrap fabric to check tension and stitch quality.
Adjust settings: Modify stitch length and width as needed.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Stitches: 250 built-in stitches
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Buttonholes: 10 one-step automatic buttonholes
Needle Positions: Adjustable left/right
Presser Feet: 9 included snap-on feet
Bobbin: Top drop-in bobbin system
Display: LCD with stitch information
Power Source: Standard household electrical outlet
Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel buttons and LCD display.

Main Controls: Power switch, stitch selection dial, LCD display, automatic thread cutter, start/stop button, speed control slider, reverse stitch button.

Stitch Adjustment: Stitch length (0-5mm), stitch width (0-7mm), needle position (left/center/right). Memory: Store and recall custom stitch combinations. Utility: Automatic needle threader, thread tension adjustment, presser foot pressure.

Stitch Selection

Choose from 250 built-in stitches using stitch selection dial.

Turn stitch selection dial to desired stitch category.
Use arrow buttons to select specific stitch pattern.
Adjust stitch length and width using adjustment buttons.
For decorative stitches: Select pattern and test on scrap fabric.
For buttonholes: Use automatic one-step buttonhole function.

Tip: Always test stitches on scrap fabric before sewing project.

Advanced Functions

Memory Function: Store up to 50 stitch combinations for quick recall. Monogramming: Select from 3 built-in alphabet fonts. Mirror Imaging: Create symmetrical stitch patterns. Combination Stitching: Program sequence of multiple stitches.

Maintenance & Cleaning

Unplug machine before cleaning. Remove lint and dust regularly.

Clean feed dogs: Use small brush to remove lint.
Clean bobbin area: Remove bobbin case and clean housing.
Oil machine: Use only Janome recommended sewing machine oil.
Cover machine: Use dust cover when not in use.

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories: 9 snap-on presser feet, assorted needles, bobbins, seam ripper, lint brush, screwdriver, auxiliary spool pin, spool holder, foot control, power cord, hard cover.

Warranty Information

25-year limited warranty covering mechanical parts. Electronic components covered for 2 years. Labor covered for 1 year. Warranty registration required within 10 days of purchase. For service, contact authorized Janome dealer or visit www.janome.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connections; ensure power switch is on.
Thread breaking	Tension/thread quality	Reduce tension; use better quality thread; check needle.
Uneven stitches	Threading/tension	Re-thread machine; adjust tension; clean race hook.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct needle for fabric type.
Bobbin issues	Incorrect winding	Rewind bobbin evenly; ensure correct insertion.

Reset: Turn machine off and on to reset computer functions.

Service: Contact authorized Janome dealer or 1-800-631-0183