Janome AQS2009 Manual

The Janome AQS2009 is a versatile quilting and sewing machine designed for both beginners and experienced sewers. It features 60 built-in stitches, automatic needle threader, drop feed for free-motion quilting, one-step buttonhole, and easy stitch selection. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 60 built-in stitches, automatic needle threader, drop feed, one-step buttonhole, stitch width/length adjustment, free arm, LED work light.

Feature	Description
Built-in stitches	60 utility, decorative, and quilting stitches
Automatic needle threader	Easy threading with push-button operation
Drop feed	Lower feed dogs for free-motion quilting
One-step buttonhole	Automatic buttonhole creation
Stitch selection dial	Easy stitch pattern selection
Free arm	For sewing cuffs and sleeves
LED work light	Bright illumination of work area
Reverse stitch	Reinforce seams with reverse sewing
Bobbin winding	Built-in bobbin winder
Presser feet	Multiple included presser feet for different tasks

Unpacking and Setup

Carefully unpack all components and place on stable surface.

1. Remove machine from packaging: Lift machine by base, not handwheel.
2. Attach accessories: Install foot controller, power cord, and accessory box.
3. Thread machine: Follow threading diagram on machine.
4. Insert needle: Ensure flat side faces back, tighten screw securely.
5. Connect power: Plug into appropriate electrical outlet.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

Getting Started

Power on machine; follow basic setup procedures.

1. Thread machine: Use automatic needle threader for easy threading.
2. Wind bobbin: Follow bobbin winding instructions in manual.
3. Insert bobbin: Drop-in bobbin system with clear cover.
4. Select stitch: Turn dial to desired stitch pattern.
5. Adjust settings: Set stitch length and width as needed.
6. Begin sewing: Place fabric under presser foot and start slowly.

CAUTION! Keep fingers away from needle area during operation.

Specifications

• Stitches: 60 built-in stitches
• Stitch Width: Up to 7mm
• Stitch Length: Up to 5mm
• Needle Positions: Multiple positions available
• Automatic Features: Needle threader, bobbin winding, buttonhole
• Feed System: Drop feed for free-motion work
• Work Space: Free arm capability
• Lighting: LED work light
• Power Source: 110-120V AC, 60Hz
• Weight: Approximately 15 lbs

Controls and Functions

Front Panel: Stitch selection dial, stitch width/length controls, reverse stitch button, automatic needle threader.

Main Controls: Power switch, foot controller, handwheel, bobbin winder, drop feed lever.

Stitch Selection: Turn dial to select from 60 built-in patterns. Stitch Adjustment: Width dial (0-7mm), length dial (0-5mm). Special Functions: Reverse stitch, automatic needle threader, drop feed for quilting, one-step buttonhole.

Stitch Selection

Choose from 60 utility, decorative, and quilting stitches.

1. Basic stitches: Straight stitch, zigzag, stretch stitches
2. Decorative stitches: Scallop, feather, honeycomb patterns
3. Quilting stitches: Special stitches for quilt piecing
4. Buttonholes: One-step automatic buttonhole
5. Blind hem: Perfect for invisible hems
6. Overcast: For finishing fabric edges

Tip: Test stitches on scrap fabric before starting project.

Advanced Features

Free-motion quilting: Drop feed dogs for creative quilting. Automatic needle threader: Push-button threading. One-step buttonhole: Perfect buttonholes every time.

1. Drop feed: Lower feed dogs for free-motion work
2. Needle threader: Push lever for automatic threading
3. Buttonhole: Select buttonhole stitch, follow markings
4. Reverse stitching: Reinforce seam beginnings and ends
5. Variable speed: Control sewing speed with foot controller

WARNING! Always turn off machine when changing needles or cleaning.

Maintenance & Care

Regular cleaning and maintenance ensure optimal performance.

1. Daily cleaning: Remove lint from bobbin area and feed dogs
2. Monthly oiling: Apply sewing machine oil to specified points
3. Needle replacement: Change needle regularly (every 8-10 hours)
4. Cover machine: Use dust cover when not in use
5. Professional service: Annual servicing recommended

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with machine.

• General purpose foot
• Zigzag foot
• Buttonhole foot
• Zipper foot
• Blind hem foot
• Overedge foot
• Seam ripper
• Brush
• Extra needles
• Bobbin (4 total)
• Screwdriver
• Foot controller
• Power cord

Warranty Information

Janome limited warranty: 25 years on mechanical parts, 5 years on electronic components, 2 years on labor. Warranty valid only when machine is purchased from authorized dealer. For service, contact authorized Janome dealer or visit www.janome.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot controller is plugged in properly.
Thread breaking	Tension/thread quality	Check thread tension; use quality thread; rethread machine.
Uneven stitches	Needle/tension issues	Replace needle; check tension settings; clean machine.
Needle threader not working	Position/obstruction	Ensure needle is in highest position; check for thread obstruction.
Fabric not feeding	Feed dogs/stitch length	Check feed dog position; adjust stitch length; clean feed dogs.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin is inserted correctly.

Service: Contact authorized Janome dealer or visit www.janome.com for support.