Janome Beachcomber No 440083952 Owners Manual

The Janome Beachcomber No 440083952 is a high-quality sewing machine designed for beach-themed crafts and general sewing projects. This versatile machine features multiple stitch patterns, adjustable tension control, built-in needle threader, free arm capability, and easy bobbin winding system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main body with free arm, built-in stitch patterns, tension dial, stitch length selector, reverse stitch button, presser foot pressure dial.

Feature	Description
Built-in stitches	22 built-in stitch patterns including straight, zigzag, and decorative
Free arm capability	For sewing cuffs and sleeves
Built-in needle threader	Easy threading system
Drop feed	For free-motion sewing and darning
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable up to 5mm
Reverse stitch lever	For reinforcing seams
Bobbin winding system	Built-in bobbin winder
Presser foot pressure	Adjustable for different fabrics
Accessory storage	Built-in compartment for accessories

Installation & Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

Remove machine from packaging: Carefully lift machine from box and remove all protective materials.
Position machine: Place on sturdy table or sewing cabinet with adequate lighting.
Connect foot control: Plug foot control into machine socket.
Connect power: Plug power cord into electrical outlet (120V AC, 60Hz).
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
Wind bobbin: Follow bobbin winding instructions in next section.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; follow step-by-step setup procedure.

Thread upper thread: Follow numbered threading guide on machine.
Insert bobbin: Open bobbin cover, insert bobbin with thread unwinding counterclockwise.
Bring up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
Select stitch: Turn stitch pattern dial to desired stitch.
Adjust settings: Set stitch length and width according to fabric type.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always start with needle in highest position. Keep work area clean and organized.

Specifications

Model: Janome Beachcomber No 440083952
Stitches: 22 built-in stitch patterns
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm adjustable
Buttonholes: 4-step buttonhole
Needle System: HA-1, 15x1
Bobbin: Front loading, class 15 transparent
Max Sewing Speed: 860 stitches per minute
Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
Power Source: 120V AC, 60Hz
Dimensions: 15.4" W x 7.1" H x 12.2" D
Weight: 13.2 lbs

Controls and Settings

Main controls located on front and side of machine. Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever.

Stitch Selection: Turn dial to select from 22 built-in stitches including straight, zigzag, stretch, and decorative stitches.

Tension Control: Upper thread tension dial (0-9 settings). Normal setting is 4 for medium weight fabrics.

Presser Foot Pressure: Adjustable dial for different fabric thicknesses. Light pressure for delicate fabrics, heavier pressure for thick fabrics.

Stitch Selection

Machine offers variety of stitches for different sewing applications.

Straight Stitch: For basic sewing, topstitching, and gathering
Zigzag Stitch: For finishing edges, appliqué, and stretch fabrics
Blind Hem Stitch: For nearly invisible hems
Elastic Stitch: For sewing elastic and decorative effects
Decorative Stitches: Multiple patterns for creative projects
Buttonhole Stitch: 4-step buttonhole for professional results

Tip: Always test stitch on scrap fabric before starting your project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily cleaning: Brush out lint from bobbin area and feed dogs
Monthly oiling: Apply 1-2 drops of sewing machine oil to designated points
Needle replacement: Change needle after every project or 8 hours of sewing
Cover when not in use: Protect from dust and moisture
Professional service: Annual servicing recommended for heavy use

WARNING! Unplug machine before cleaning or maintenance. Use only Janome recommended oils and accessories.

Accessories

Standard accessories included with machine.

Accessory	Quantity	Use
Zigzag Foot	1	General sewing
Zipper Foot	1	Installing zippers
Buttonhole Foot	1	Making buttonholes
Button Sewing Foot	1	Sewing on buttons
Bobbins (Class 15)	4	Thread storage
Needles (HA-1)	3	Replacement needles
Seam Ripper/Brush	1	Cleaning and correcting
Screwdriver	1	Adjustments

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome; all rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Customer service: 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't run	Power connection	Check power cord; ensure foot control is plugged in properly.
Thread breaking	Tension/needle	Check threading; reduce tension; replace needle.
Uneven stitches	Threading/tension	Re-thread machine; adjust tension; check bobbin.
Fabric not feeding	Feed dogs	Check feed dog position; clean feed dogs.
Needle breaks	Installation/fabric	Ensure needle inserted correctly; use proper needle for fabric.
Bobbin issues	Winding/insertion	Re-wind bobbin evenly; ensure bobbin inserted correctly.

Reset: Turn machine off and restart if electronic issues occur.

Service: 1-800-631-0183; www.janome.com