Janome CoverPro 2000CPX Manual

The Janome CoverPro 2000CPX is a professional-grade coverstitch machine designed for advanced sewing applications. It features a 2/3 needle coverstitch system, differential feed, built-in rolled hem capability, adjustable presser foot pressure, free arm capability, and advanced threading system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 2/3 needle coverstitch system, Differential feed mechanism, Built-in rolled hem, Free arm, Adjustable presser foot, Advanced threading system.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Attach power cord to machine and plug into grounded outlet.
3. Install needle(s) following proper orientation and tightening.
4. Wind bobbin and install in bobbin case.
5. Thread machine following numbered threading guide.
6. Adjust presser foot pressure based on fabric type.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; test stitches on scrap fabric.

1. Select needle configuration (2 or 3 needle setup).
2. Set stitch length appropriate for fabric (2.5-3.5mm for medium weight).
3. Adjust differential feed for fabric type (1.0 for woven, 0.8-1.2 for knit).
4. Test coverstitch on scrap fabric of same material as project.
5. Adjust thread tension if needed for balanced stitches.
6. Practice rolled hem setting if required for project.

CAUTION! Always start with needle in highest position. Keep fingers away from moving parts.

Specifications

• Machine Type: Professional Coverstitch
• Needle System: 2/3 needle capability
• Stitch Types: Coverstitch, Flatlock, Rolled Hem
• Stitch Length: 1-4mm adjustable
• Differential Feed: Yes, adjustable
• Presser Foot: Adjustable pressure
• Free Arm: Yes
• Power Requirements: 120V AC, 60Hz
• Dimensions: 16.5" x 7.9" x 12.6"
• Weight: 25.5 lbs
• Warranty: 25-year limited warranty

Controls and Settings

Main controls: Power switch, Stitch length dial, Differential feed dial, Needle position selector, Thread tension dials.

Adjustment Features: Stitch length (1-4mm), Differential feed ratio, Presser foot pressure, Thread tension (upper and lower loopers), Rolled hem lever.

Operation: Power on/off switch, Handwheel for manual control, Reverse stitch lever, Free arm conversion, Needle plate selection.

Stitch Applications

Professional coverstitch for hems, seams, and decorative stitching.

1. Basic Coverstitch: For hemming knit garments
2. Flatlock Stitch: For decorative seams and joining fabric
3. Rolled Hem: For professional narrow hems
4. Elastic Application: Using differential feed for stretch
5. Decorative Stitching: Using contrasting thread colors

Tip: Always test stitch settings on scrap fabric before starting project.

Threading Guide

Follow numbered threading path for proper operation.

1. Place spools on spool pins in correct order.
2. Follow numbered threading path from spool to needle.
3. Thread upper looper following guide markings.
4. Thread lower looper through tension assembly.
5. Insert needles and thread following eye orientation.
6. Pull threads under presser foot and toward back.

WARNING! Ensure machine is powered off during threading. Follow exact threading sequence.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean lint and dust from hook area after each project.
2. Oil machine following manufacturer's guidelines.
3. Check needle condition regularly; replace if bent or dull.
4. Clean feed dogs and needle plate area.
5. Store with cover when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended lubricants.

Accessories

Standard accessories included with machine.

• Standard presser foot
• Rolled hem foot
• Additional needles (various sizes)
• Bobbin case and bobbins
• Screwdrivers and lint brush
• Instruction manual and operation guide
• Power cord and foot controller

Safety Information

Important safety precautions for machine operation.

• Always disconnect power when not in use
• Keep fingers away from moving needles
• Use proper lighting in work area
• Do not operate with damaged cord
• Keep machine clean and free of lint
• Use only recommended accessories
• Store out of reach of children

Troubleshooting

Service: Contact authorized Janome service center for repairs.

Support: 1-800-631-0183; www.janome.com