The Janome DC 2015 is a computerized sewing machine featuring 15 built-in stitches, one-step auto buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, adjustable stitch length and width, and easy stitch selection dial. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Computerized control panel, automatic needle threader, drop feed mechanism, built-in thread cutter, stitch selection dial, reverse stitch button.
| Feature | Description |
|---|---|
| Built-in stitches | 15 utility and decorative stitches |
| Auto buttonhole | One-step automatic buttonhole |
| Needle threader | Automatic needle threading system |
| Drop feed | Free-motion sewing capability |
| Thread cutter | Built-in thread cutting blade |
| Stitch length/width | Adjustable stitch settings |
| Reverse stitch | Reinforcement stitching button |
| Power switch | Main power on/off control |
| Speed control | Adjustable sewing speed |
| Presser feet | Multiple included presser feet |
Unpack and inspect contents. Place on stable sewing surface.
WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.
Power on machine; follow setup procedures.
CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.
Access functions via control panel and stitch selection dial.
Control Panel: Power switch, stitch selection dial, reverse stitch button, stitch length dial, stitch width dial.
Basic Settings: Stitch selection (dial), stitch length (1-4mm), stitch width (0-5mm), reverse stitching, thread tension adjustment. Advanced: Drop feed lever for free-motion sewing, automatic needle threader, built-in thread cutter.
15 built-in stitches including straight, zigzag, stretch, and decorative stitches.
Tip: Refer to stitch guide on machine for recommended settings for each stitch type.
Auto buttonhole: Select buttonhole stitch, place button in foot, machine creates perfect buttonhole automatically. Drop feed: Lower feed dogs for free-motion quilting and embroidery. Automatic needle threader: Easy threading with built-in mechanism.
Unplug before cleaning. Remove lint and dust regularly. Oil according to maintenance schedule.
CAUTION! Never use compressed air to clean machine. Use only recommended sewing machine oil.
UL listed for household use. Complies with international safety standards. Copyright © 2015 Janome; trademarks of Janome Sewing Machine Co., Ltd. For support, visit www.janome.com or contact authorized service centers.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine not running | Power connection | Check power cord connection; ensure foot control is plugged in properly. |
| Thread breaking | Tension/needle | Check thread tension; replace needle; ensure proper threading. |
| Uneven stitches | Threading/tension | Re-thread machine; adjust tension; check bobbin installation. |
| Needle not moving | Thread jam | Turn off power; remove bobbin case; clear any thread jams. |
| Fabric not feeding | Feed dogs | Check feed dog position; clean feed dogs; adjust presser foot pressure. |
Service: Contact authorized Janome service center for repairs. www.janome.com