janome dc2101 manual free

The Janome DC2101 is a computerized sewing machine with 30 built-in stitches, one-step auto buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, and easy stitch selection dial. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized stitch selection panel, automatic needle threader, drop feed lever, stitch width/length dials, built-in thread cutter, accessory compartment.

Installation & Setup

Unpack and inspect contents. Place on stable sewing surface.

1. Remove packaging materials and protective covers
2. Place machine on sturdy table or sewing cabinet
3. Connect foot control pedal to machine
4. Plug power cord into electrical outlet
5. Install needle following directional markings
6. Wind bobbin and thread machine

WARNING! Keep fingers away from moving needle. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow basic setup procedures.

1. Turn power switch to ON position
2. Select basic straight stitch using stitch selection dial
3. Practice stitching on scrap fabric
4. Adjust stitch length and width as needed
5. Test reverse stitching function
6. Practice with automatic needle threader

CAUTION! Always start with basic stitches and practice on scrap fabric before beginning projects.

Specifications

• Stitches: 30 built-in stitches
• Buttonhole: One-step automatic
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm adjustable
• Needle Threader: Automatic
• Feed System: Drop feed for free-motion
• Power Source: 120V AC, 60Hz
• Machine Weight: Standard portable weight
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button.

Basic Controls: Power switch, foot control, stitch selection dial, reverse stitch button, bobbin winder.

Stitch Adjustment: Length (0-4mm), Width (up to 5mm). Special Functions: Automatic needle threader, drop feed lever, built-in thread cutter, one-step buttonhole.

Stitch Selection

30 built-in stitches including utility, decorative, and stretch stitches.

1. Turn stitch selection dial to desired stitch number
2. Adjust stitch length for fabric type
3. Adjust stitch width for decorative effects
4. Test stitch on scrap fabric
5. Use reverse stitch to secure beginnings and endings

Tip: Refer to stitch guide chart for recommended settings for different fabrics.

Advanced Functions

One-step buttonhole: Position fabric, select buttonhole stitch, machine creates perfect buttonhole automatically.

1. Mark buttonhole position on fabric
2. Attach buttonhole foot
3. Select buttonhole stitch
4. Machine automatically measures and sews buttonhole
5. Use seam ripper to open buttonhole

Free-motion sewing: Lower feed dogs for quilting, darning, and decorative stitching.

Maintenance & Care

Unplug before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project
2. Oil machine as directed in maintenance section
3. Replace needle regularly (every 8-10 hours of sewing)
4. Cover machine when not in use
5. Store in dry, dust-free environment

CAUTION! Use only Janome recommended needles and accessories. Do not use compressed air for cleaning.

Regulatory Information

UL listed for safety. Complies with FCC regulations for digital devices. Copyright © Janome America, Inc. For support, visit www.janome.com or contact customer service at 1-800-631-0183.

Troubleshooting

Service: 1-800-631-0183; www.janome.com