The Janome DC2101 is a computerized sewing machine with 210 built-in stitches, automatic needle threader, built-in needle plate, drop feed for free-motion sewing, automatic thread cutter, and LCD screen. Features include one-step buttonhole, adjustable stitch length and width, speed control slider, and built-in memory for stitch patterns. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: LCD display, automatic needle threader, stitch selection dial, speed control slider, bobbin winding system, built-in needle plate.
| Feature | Description |
|---|---|
| Built-in stitches | 210 stitch patterns including utility, decorative, and quilting stitches |
| Automatic needle threader | Easy threading with push-pull mechanism |
| LCD screen | Displays selected stitch number, length, and width |
| One-step buttonhole | Automatic buttonhole sizing and stitching |
| Automatic thread cutter | Convenient thread cutting at push of button |
| Drop feed | Free-motion sewing capability |
| Speed control slider | Adjustable sewing speed |
| Memory function | Store favorite stitch combinations |
| Needle up/down | Programmable needle position |
| Reverse stitch | Reinforce seams with reverse stitching |
Unpack and inspect contents. Place on stable surface.
WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.
Power on machine; follow initial setup procedures.
CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.
Access functions via control panel and stitch selection dial.
Control Panel: Power switch, reverse stitch button, automatic thread cutter, needle up/down, stitch width/length adjustment, memory buttons.
Stitch Selection: Turn dial to select from 210 built-in stitches. LCD Display: Shows stitch number, width, and length settings. Memory Function: Store up to 10 stitch combinations. Buttonhole: Automatic one-step buttonhole with sensor. Tension Control: Adjust upper thread tension dial. Speed Control: Use slider to control maximum sewing speed.
Select from 210 built-in stitches including utility, decorative, and quilting stitches.
Tip: Always test stitches on scrap fabric before sewing project.
Advanced features for specialized sewing techniques.
WARNING! Always use proper presser foot for each function. Incorrect foot selection may cause damage.
Regular maintenance ensures optimal performance.
CAUTION! Unplug machine before cleaning or maintenance. Use only Janome-approved accessories and supplies.
UL Listed: Complies with US safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome; trademarks of Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183. Made in Taiwan.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power connection | Check power cord connection; ensure foot controller is plugged in properly |
| Thread breaking | Tension/thread quality | Reduce upper tension; check for rough spots on needle; use better quality thread |
| Skip stitches | Needle/blunt needle | Replace needle; ensure correct needle type for fabric; rethread machine |
| Bobbin thread bunching | Bobbin threading | Rethread bobbin; ensure bobbin turns counterclockwise; check bobbin case |
| Uneven stitches | Tension settings | Adjust upper and lower tension; clean tension discs; check needle size |
| Machine jams | Thread buildup | Remove bobbin case and clean; check for stray threads in hook race |
| Noise during operation | Lack of lubrication | Oil machine according to maintenance schedule; check for loose parts |
Reset: Turn machine off and on to reset computer functions.
Service: 1-800-631-0183; www.janome.com for authorized service centers