janome dc2101le manual

The Janome DC2101LE is a computerized sewing machine with 100 built-in stitches, automatic needle threader, one-step buttonhole, drop feed for free-motion sewing, built-in needle plate window, top loading full rotary hook bobbin system, easy reverse stitch button, stitch width and length adjustment, and built-in thread cutter. Powered by standard household electrical outlet. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, automatic needle threader, built-in stitch patterns, drop feed mechanism, top loading bobbin system, accessory compartment.

Feature	Description
Built-in stitches	100 stitch patterns including utility, decorative, and stretch stitches
Automatic needle threader	Easy threading with push-pull mechanism
One-step buttonhole	Automatic buttonhole creation with consistent results
Drop feed	Lower feed dogs for free-motion sewing and quilting
Top loading bobbin	Easy bobbin insertion and monitoring
Stitch width adjustment	0-7mm width adjustment for various stitch types
Stitch length adjustment	0-5mm length adjustment for fine-tuning stitches
Reverse stitch button	Easy reinforcement of stitches
Built-in thread cutter	Convenient thread cutting at front of machine
Speed control slider	Adjustable sewing speed for different skill levels

Installation

Unpack and inspect contents. Place on stable sewing table or cabinet.

1. Remove packaging materials and protective covers.
2. Place machine on flat, stable surface at comfortable working height.
3. Connect foot control pedal to machine and plug into power outlet.
4. Install needle following directional markings.
5. Wind and insert bobbin following threading diagram.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable placement before operation.

First-Time Setup

Power on machine; follow initial setup procedures.

1. Thread machine: Follow numbered threading path from spool to needle.
2. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
3. Select basic stitch: Choose straight stitch for initial testing.
4. Test sew: Use scrap fabric to test machine operation.
5. Adjust tension: Check stitch formation and adjust if necessary.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading.

Specifications

• Stitch Patterns: 100 built-in stitches
• Buttonholes: One-step automatic buttonhole
• Needle Positions: Adjustable left/right needle position
• Stitch Width: 0-7mm maximum
• Stitch Length: 0-5mm maximum
• Bobbin System: Top loading, jam-resistant
• Presser Feet: Multiple included for various applications
• Power Source: Standard household electrical outlet
• Machine Weight: Approximately 15.4 lbs (7 kg)
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via LCD screen and control buttons. Front Panel: Power switch, stitch selection buttons, reverse stitch, needle up/down.

Control Panel: Stitch selection dial, LCD display, stitch width/length buttons, reverse button, automatic needle threader lever.

Stitch Selection: Choose from 100 built-in patterns. Adjustments: Stitch width (0-7mm), stitch length (0-5mm), needle position. Functions: Reverse stitching, automatic thread cutter, drop feed control, bobbin winding.

Connecting Accessories

Standard accessories: Various presser feet, bobbins, needles, seam ripper, brush, screwdriver.

1. Turn off machine before changing accessories.
2. Install presser feet: Lift lever, snap foot into place.
3. Change needles: Loosen screw, insert new needle with flat side to back.
4. Attach extension table: Slide into position on free arm.

Tip: Always use Janome genuine accessories for optimal performance.

Basic Sewing Operations

Supports various fabrics and sewing techniques.

1. Thread machine: Follow numbered path and use automatic needle threader.
2. Select stitch: Choose pattern using stitch selection dial.
3. Adjust settings: Set stitch width and length as needed.
4. Begin sewing: Place fabric, lower presser foot, press foot control.
5. Reverse stitching: Press reverse button to secure stitches.
6. Finish sewing: Raise needle, lift presser foot, remove fabric.
7. Cut threads: Use built-in thread cutter.

WARNING! Never pull fabric while sewing. Let feed dogs move fabric naturally.

Advanced Functions

One-step buttonhole: Automatic perfect buttonholes. Drop feed: Free-motion sewing for quilting and embroidery. Memory function: Store favorite stitch combinations.

Care & Maintenance

Unplug before cleaning. Regular oiling and dust removal recommended.

1. Clean bobbin area regularly with provided brush.
2. Oil moving parts as specified in maintenance schedule.
3. Cover machine when not in use to prevent dust accumulation.
4. Use genuine Janome needles and bobbins.

CAUTION! Use only sewing machine oil. Never use household oils.

Regulatory Information

UL listed for safety standards. Complies with international electrical safety requirements. Copyright © Janome Sewing Machine Co., Ltd. For support, visit www.janome.com or contact authorized Janome service centers. 25-year limited warranty applies.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection/foot control	Check power cord; ensure foot control is plugged in properly.
Thread breaking	Tension/thread quality	Check threading path; adjust tension; use quality thread.
Skip stitches	Needle/thread mismatch	Change needle; ensure correct needle for fabric type.
Bobbin thread bunching	Bobbin insertion	Reinsert bobbin ensuring correct direction; check upper threading.
Uneven stitches	Tension settings	Adjust upper and lower tension; clean bobbin area.
Needle breaks	Bent needle/fabric pull	Replace needle; avoid pulling fabric; check needle installation.

Reset: Turn machine off and on to reset computerized functions.

Service: Contact authorized Janome service center; www.janome.com