Janome Harmony 2039 Manual

The Janome Harmony 2039 is a versatile sewing machine featuring 39 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in LED light, top-loading bobbin system, free arm capability, and multiple presser feet. Powered by standard household outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup and Installation 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 39 built-in stitches, automatic needle threader, drop feed, LED work light, free arm, top-loading bobbin system.

Feature	Description
Built-in stitches	39 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole creation
Automatic needle threader	Easy threading system
Drop feed	Free-motion sewing capability
LED work light	Bright illumination of work area
Free arm	For sewing cuffs and sleeves
Top-loading bobbin	Easy bobbin insertion and viewing
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable up to 5mm
Reverse stitch	For securing stitches

Setup and Installation

Unpack and inspect contents. Place on stable surface.

Remove all packaging materials and protective covers.
Place machine on sturdy table or sewing cabinet.
Connect foot control pedal to machine.
Plug power cord into machine and wall outlet.
Install needle and thread machine following threading diagram.
Wind and insert bobbin.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow initial setup steps.

Turn stitch selection dial to straight stitch position.
Place fabric under presser foot and lower foot.
Gently press foot control to begin sewing.
Practice basic stitches on scrap fabric.
Adjust stitch length and width as needed.
Test reverse stitching function.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitches: 39 built-in stitches
Buttonhole: One-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm adjustable
Needle Threader: Automatic
Bobbin System: Top-loading, jam-resistant
Feed System: Drop feed for free-motion
Lighting: Built-in LED
Free Arm: Yes
Power Source: Standard household outlet
Weight: Approximately 15 lbs

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse button, bobbin winder.

Stitch Selection: Turn dial to choose from 39 stitches. Stitch Length: Adjust from 0-4mm. Stitch Width: Adjust up to 5mm for zigzag and decorative stitches. Reverse: Hold button for backstitching. Bobbin Winding: Follow marked path for proper bobbin winding.

Stitch Selection

Choose from 39 built-in stitches for various sewing needs.

Straight Stitch: Basic sewing (positions 1-3)
Zigzag Stitch: Overcasting and appliqué (positions 4-6)
Blind Hem: Nearly invisible hems (position 7)
Stretch Stitches: For knit fabrics (positions 8-12)
Decorative Stitches: Embellishment (positions 13-39)
Buttonhole: Automatic one-step (special position)

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Free-motion sewing, buttonholes, and specialty techniques.

Drop Feed: Lower feed dogs for free-motion quilting.
Buttonhole: Position fabric, select buttonhole stitch, sew automatically.
Zipper Installation: Use zipper foot for perfect zippers.
Button Sewing: Attach buttons quickly with special function.
Gathering: Use specific stitch for even gathers.
Darning: Free-motion for fabric repairs.

WARNING! Always use appropriate presser foot for each function.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning.
Remove needle plate and clean lint buildup.
Oil machine as indicated in manual (specific points only).
Wipe exterior with soft, dry cloth.
Replace needle regularly (every 8-10 hours of sewing).
Check bobbin case for lint accumulation.

CAUTION! Do not use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories for various sewing tasks.

Accessory	Use
All-purpose foot	General sewing
Zipper foot	Zipper installation
Buttonhole foot	Automatic buttonholes
Blind hem foot	Nearly invisible hems
Overedge foot	Edge finishing
Bobbin (extra)	Additional bobbin
Needles (assorted)	Different fabric types
Seam ripper	Stitch removal
Brush	Lint cleaning
Screwdriver	Needle plate removal

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Copyright © 2025 Janome America, Inc. All rights reserved. For technical support, visit www.janome.com or contact 1-800-631-0183. Manufactured under license from Janome Sewing Machine Co., Ltd.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure machine is turned on; check foot control connection.
Thread breaking	Tension/needle	Rethread machine; check needle for damage; adjust tension.
Uneven stitches	Threading/bobbin	Rethread upper and lower threads; check bobbin insertion.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; check presser foot pressure.
Needle breaks	Bent needle/wrong size	Replace needle; use correct needle for fabric; don't pull fabric.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin inserted correctly.

Service: 1-800-631-0183; www.janome.com