Janome Harmony 2039 User Manual

The Janome Harmony 2039 is a versatile computerized sewing machine featuring 39 built-in stitches, one-step auto buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, top-loading bobbin system, LED lighting, speed control slider, and reverse sewing function. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Advanced Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized stitch selection panel, automatic needle threader, drop feed lever, bobbin winding system, presser foot pressure dial, stitch width/length controls.

Feature	Description
Stitch selection panel	LCD display with 39 built-in stitch patterns
Automatic needle threader	Easy threading with push-button operation
Drop feed lever	Enables free-motion sewing and quilting
Top-loading bobbin	Easy bobbin insertion with clear cover
Built-in thread cutter	Convenient thread cutting at front of machine
LED work light	Bright illumination of sewing area
Speed control slider	Adjustable sewing speed from slow to fast
Reverse sewing button	Reinforce stitches with single button press
One-step buttonhole	Automatic buttonhole creation
Presser foot pressure	Adjustable for different fabric types

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove protective packaging: Remove all foam and tape from machine.
Install foot controller: Plug into front of machine.
Connect power: Plug power cord into machine and wall outlet.
Install accessories: Attach standard presser foot and needle.
Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Always turn off power when changing needles or presser feet.

First-Time Setup

Power on machine; follow setup procedures.

Thread machine: Follow numbered threading path on machine.
Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
Select basic stitch: Choose straight stitch for initial testing.
Test sew: Use scrap fabric to test machine operation.
Adjust tension: Check stitch formation and adjust if needed.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitch Selection: 39 built-in stitches including utility, decorative, and stretch.
Buttonhole: One-step automatic buttonhole.
Needle Positions: Left, center, and right needle positions.
Stitch Length: Adjustable from 0-4mm.
Stitch Width: Adjustable from 0-5mm.
Bobbin: Class 15 transparent bobbin.
Lighting: LED work light.
Power Source: 120V AC, 60Hz.
Machine Weight: 12.5 lbs (5.7 kg).
Warranty: 25-year limited warranty.

Controls and Settings

Access functions via stitch selection panel and control buttons. Front Panel: Power switch, stitch selection buttons, reverse button, needle up/down button.

Stitch Panel: Stitch pattern selection, stitch length/width adjustment, mirror image, memory function.

Basic Settings: Stitch selection (1-39), stitch length (0-4mm), stitch width (0-5mm), needle position (left/center/right). Advanced Functions: Mirror imaging, memory stitch, automatic thread cutter, bobbin warning indicator.

Connecting Accessories

Presser Feet: Standard, zipper, buttonhole, blind hem, overcasting. Additional: Extension table, seam guide, auxiliary spool pin.

Turn off power before changing accessories.
Align presser foot with ankle and lower presser foot lever.
Ensure proper needle installation for specific feet.
Use extension table for larger projects.

Tip: Always use the correct presser foot for each sewing technique.

Basic Sewing Operations

Supports various fabrics from lightweight to medium weight.

Thread machine: Follow numbered path and use automatic needle threader.
Wind bobbin: Use built-in bobbin winder.
Select stitch: Choose from 39 built-in stitches.
Adjust settings: Set stitch length and width as needed.
Begin sewing: Place fabric under presser foot and lower lever.
Guide fabric: Let machine feed fabric; do not pull.
Reverse: Press reverse button to secure stitches.
Finish: Raise needle, lift presser foot, and remove fabric.

WARNING! Never sew over pins. Keep fingers away from moving needle.

Advanced Functions

One-Step Buttonhole: Automatic sizing and stitching. Free-Motion Sewing: Drop feed dogs for quilting and embroidery. Memory Stitch: Combine and save stitch patterns.

Care & Maintenance

Unplug before cleaning. Remove lint and dust regularly. Oil moving parts as instructed in manual.

CAUTION! Use only Janome recommended needles and accessories. Store in dry place away from moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot controller is plugged in.
Thread breaking	Tension/thread quality	Check threading path; adjust tension; use quality thread.
Skip stitches	Needle/damage	Replace needle; ensure correct needle type for fabric.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure proper insertion direction.
Uneven stitches	Tension/threading	Rethread both top and bobbin threads; adjust tension.

Reset: Turn machine off and on to reset computerized functions.

Service: 1-800-631-0183; www.janome.com