janome hello kitty sewing machine 11706 manual

The Janome Hello Kitty Sewing Machine 11706 is a compact, user-friendly sewing machine featuring the iconic Hello Kitty design. This lightweight machine is perfect for beginners and young sewers, offering basic sewing functions with easy operation. It includes built-in stitches, automatic needle threading, adjustable stitch length and width, free arm capability, and comes with essential accessories. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Operations 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Hello Kitty themed body, built-in stitches, automatic needle threader, free arm, accessory storage, foot pedal control.

FeatureDescription
Built-in stitchesMultiple decorative and utility stitches
Automatic needle threaderEasy threading for beginners
Free arm capabilityFor sewing cuffs and tubular items
Stitch length adjustmentAdjustable stitch length control
Stitch width adjustmentAdjustable stitch width control
Foot pedal controlVariable speed control via foot pedal
Reverse stitch leverFor reinforcing stitches
Bobbin winding systemTop-loading bobbin system
Accessory storageBuilt-in compartment for accessories
Lightweight designEasy to carry and store

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

  1. Remove machine from packaging: Carefully lift machine from box.
  2. Install foot pedal: Connect foot pedal to machine port.
  3. Connect power: Plug power cord into machine and electrical outlet.
  4. Install needle: Insert needle with flat side facing back, tighten screw.
  5. Wind bobbin: Follow bobbin winding instructions in manual.
  6. Thread machine: Use automatic needle threader for easy threading.

WARNING! Keep fingers away from needle area during operation. Always turn off when not in use.

First-Time Operation

Power on machine; follow basic setup procedures.

  1. Select stitch: Turn stitch selection dial to desired pattern.
  2. Adjust settings: Set stitch length and width as needed.
  3. Test on scrap fabric: Always test stitch on scrap material first.
  4. Begin sewing: Press foot pedal gently to start sewing.
  5. Use reverse: Engage reverse lever to secure stitches at beginning and end.

CAUTION! Always disconnect power when changing needle or performing maintenance.

Specifications

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse lever, hand wheel.

Operation: Power switch, foot pedal speed control, automatic needle threader, bobbin winder.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for narrower or wider stitches. Reverse: Hold lever for backstitching. Tension: Adjust thread tension dial as needed for different fabrics.

Stitch Selection

Built-in stitches include straight stitch, zigzag stitch, and decorative patterns.

  1. Straight Stitch: For basic sewing and seams
  2. Zigzag Stitch: For finishing edges and stretch fabrics
  3. Decorative Stitches: Multiple patterns for embellishment
  4. Buttonhole Stitch: One-step automatic buttonhole
  5. Blind Hem Stitch: For nearly invisible hems

Tip: Always test stitch on scrap fabric before sewing your project.

Basic Sewing Operations

Step-by-step guide for basic sewing tasks.

  1. Threading: Use automatic needle threader for easy setup
  2. Bobbin winding: Follow bobbin winding diagram
  3. Fabric placement: Lower presser foot before sewing
  4. Starting: Begin with reverse stitches to secure
  5. Guiding fabric: Guide gently without pulling
  6. Finishing: End with reverse stitches
  7. Needle position: Always stop with needle in highest position

WARNING! Never pull fabric while needle is in material. Always use proper needle for fabric type.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning
  2. Remove lint from bobbin area regularly
  3. Wipe exterior with soft, dry cloth
  4. Oil moving parts as recommended in manual
  5. Store in dry, dust-free area
  6. Use cover when not in use

CAUTION! Do not use compressed air for cleaning. Never immerse machine in water.

Accessories Included

Standard accessories provided with machine.

Safety Information

Important safety precautions for operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower connectionCheck power cord connection; ensure power switch is on
Thread breakingTension/needle issuesCheck thread tension; replace needle; rethread machine
Uneven stitchesThreading/tensionRethread upper and lower threads; adjust tension
Needle not movingThread jamTurn hand wheel to free jam; clean bobbin area
Fabric not feedingPresser footEnsure presser foot is lowered; check feed dogs
Unusual noiseLint/damageClean bobbin area; check for damaged parts

Service: Contact authorized Janome service center for repairs. Visit www.janome.com or call customer service for assistance.

Janome Hello Kitty Sewing Machine 11706 Manual © - All Rights Reserved 2025