Janome Horizon 15000 Manual

The Janome Horizon 15000 is a high-performance computerized sewing machine with advanced features including a large 11-inch sewing space, 270 built-in stitches, automatic thread cutter, knee lifter, acufeed flex system, memory function, speed control, needle up/down position, and LCD touch screen display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Advanced Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD touch screen, automatic thread cutter, knee lifter, acufeed flex system, built-in stitches, memory function, speed control slider, needle up/down position.

Feature	Description
LCD Touch Screen	7-inch color display for stitch selection and settings
Automatic Thread Cutter	Cuts top and bobbin threads with one touch
Knee Lifter	Raises presser foot using knee control
AcuFeed Flex System	Even feed for multiple fabric layers
Built-in Stitches	270 stitches including utility, decorative, and quilting
Memory Function	Stores custom stitch combinations
Speed Control Slider	Adjusts sewing speed from 100 to 1000 stitches per minute
Needle Up/Down	Programmable needle position
Extension Table	Provides larger working surface
Drop Feed	For free-motion sewing and darning

Installation

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Attach extension table: Slide into position on free arm.
Install foot controller: Plug into machine power port.
Connect power cord: Plug into machine and wall outlet.
Install accessories: Place accessory box in designated compartment.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on machine; follow on-screen prompts.

Thread machine: Follow threading diagram; use automatic needle threader.
Wind bobbin: Place thread on spool pin, follow bobbin winding path.
Insert bobbin: Drop-in bobbin system with clear cover.
Select first stitch: Use touch screen to choose straight stitch.
Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Ensure stable surface; keep fingers away from needle during operation.

Specifications

Sewing Space: 11 inches (280mm) right of needle
Built-in Stitches: 270 stitches total
Stitch Width: Up to 9mm
Stitch Length: Up to 5mm
Speed: 100-1000 stitches per minute
Needle Positions: Adjustable left/right
Automatic Features: Thread cutter, tension, needle threader
Memory: Stores custom stitch combinations
Display: 7-inch LCD color touch screen
Power Source: 120V AC, 60Hz

Controls and Settings

Access functions via LCD touch screen or physical controls. Front Panel: Power switch, speed control slider, reverse button, needle up/down button.

Touch Screen: Stitch selection, stitch length/width adjustment, mirror imaging, memory functions, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-9mm), needle position, tension adjustment. Advanced Settings: Automatic thread cutter on/off, knee lifter sensitivity, beep sound, screen brightness. Memory: Save/recall custom stitch combinations, stitch sequences.

Connecting Accessories

Accessory box includes: Various presser feet, bobbins, needles, seam ripper, screwdrivers, lint brush.

Attach presser feet: Lift lever, position foot, lower lever to lock.
Install specialty feet: Walking foot, quilting foot, zipper foot, buttonhole foot.
Connect knee lifter: Attach to designated port on machine front.
Use extension table: Slide onto free arm for larger work surface.

Tip: Ensure machine is turned off before changing accessories.

Basic Sewing Operations

Supports various sewing techniques and fabric types.

Straight stitch: Select stitch 01, adjust length as needed.
Zigzag stitch: Select stitch 02, adjust width and length.
Buttonholes: Use automatic one-step buttonhole function.
Reverse stitching: Press reverse button to reinforce stitches.
Thread cutting: Press automatic thread cutter button.
Needle positioning: Use needle up/down button for precise stops.
Speed control: Use slider to adjust sewing speed.
Presser foot pressure: Adjust for different fabric thicknesses.

WARNING! Always lower presser foot before sewing. Keep fingers away from moving needle.

Advanced Functions

AcuFeed Flex: Engages for even feeding of multiple layers. Memory Function: Store and recall stitch combinations. Mirror Imaging: Create symmetrical designs. Alphabet Stitches: Built-in fonts for monogramming. Custom Combinations: Program stitch sequences for complex patterns.

Care & Maintenance

Unplug before cleaning. Regular oiling as per manual instructions. Clean lint from bobbin area and feed dogs.

CAUTION! Use only Janome recommended oil. Do not use compressed air for cleaning.

Regulatory Information

UL Listed: Complies with safety standards for household use. FCC Part 15: Class B digital device. Copyright © 2024 Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183. Warranty: 25-year limited warranty.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord; ensure foot controller is plugged in properly.
Thread breaking	Tension/thread quality	Check threading path; adjust tension; use quality thread.
Uneven stitches	Needle/tension issues	Replace needle; check bobbin; adjust upper tension.
Fabric not feeding	Feed dogs/presser foot	Check feed dog position; ensure presser foot is lowered.
Needle hitting foot	Wrong foot installed	Use correct presser foot for selected stitch.
Error messages	Electronic issues	Turn machine off and on; consult error code in manual.

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-631-0183; www.janome.com